Token swap interface implementation

README.md

@@ -471,6 +471,9 @@ Solidity interface definition
         // Tokens are successfully minted; by who, to whom and how much
         event Mint(address indexed _minter, address indexed _beneficiary, uint256 value);
 
+        // The given token has been successfully minted; by who, to whom and how much
+        event Mint(address indexed _minter, address indexed _beneficiary, address indexed _token, uint256 value);
+
         // Mint the specified value of tokens to the specified recipient
         function mintTo(address _beneficiary, uint256 value) external returns (bool);
 
@@ -628,33 +631,33 @@ Solidity interface definition
 Reference implementations  
 - <git://holbrook.no/erc20-demurrage-token.git>
 
-### TokenVend
+### TokenSwap
 
-This interface defines the mechanism for which a specific ERC20 token
-may be exchanged for a different ERC20 token.
-
-A typical use-case is generation of voting tokens based on a momentary
-voucher balance. This is especially useful if the original ERC20 token
-is subject to decay (demurrage).
-
-The tokens used for exchange **SHOULD** be locked for the full duration
-of holding the vended tokens.
-
-The withdrawal function may or may not allow partial withdrawals.
+Token swap interface that can fit token escrow aswell as token swap
+contracts.
 
 ERC165 Interface identifier  
-8a13249c
+9e2d0236
 
 Solidity interface definition  
-    interface ITokenVend {
-        // A new vended token has been created.
-        event TokenCreated(uint256 indexed _tokenIdx, uint256 indexed _supply, address _token);
+    interface ITokenSwap {
+        // Add inToken liquidity of the full balance of the sender
+        // Requires token approval for the balance.
+        function deposit(address _inToken) external returns (uint256);
 
-        // Create corresponding vended tokens for the control token balance of the caller.  
-        function getFor(address _token) external returns (uint256);
+        // Add inToken liquidity to the tune of given value. 
+        // Requires token approval for the corresponding value.
+        function deposit(address _inToken, uint256 _value) external returns (uint256);
 
-        // Recover control tokens that were used to retrieve the corresponding vended tokens.
-        function withdrawFor(address _token) external returns (uint256);
+        // Withdraw any pending outToken balance in the pool for the sender.
+        function withdraw(address _outToken) external returns (uint256);
+
+        // Withdraw pending outToken balance of given value in the pool for the sender.
+        function withdraw(address _outToken, uint256 _value) external returns (uint256);
+
+        // Exchange inToken equalling given value for outToken.
+        // Requires token approval for the value of inToken.
+        function withdraw(address _outToken, address _inToken, uint256 _value) external returns (uint256);
     }
 
 Reference implementations  

doc/texinfo/overview.texi

@@ -76,7 +76,7 @@ The following well-known solidity interfaces are partially implemented in CIC na
 
 @include tokenratechange.sol.texi
 
-@include tokenvend.sol.texi
+@include tokenswap.sol.texi
 
 @include tokenvote.sol.texi
 

doc/texinfo/tokenswap.sol.texi

@@ -0,0 +1,15 @@
+@subsection TokenSwap
+
+Token swap interface that can fit token escrow aswell as token swap contracts.
+
+@table @dfn
+@item ERC165 Interface identifier
+@include ../../build/TokenSwap.interface
+@item Solidity interface definition
+@include ../../build/contract_TokenSwap.texi
+@item Reference implementations
+@itemize
+@item
+@uref{git://holbrook.no/erc20-vend.git,}
+@end itemize
+@end table

python/README.md

@@ -471,6 +471,9 @@ Solidity interface definition
         // Tokens are successfully minted; by who, to whom and how much
         event Mint(address indexed _minter, address indexed _beneficiary, uint256 value);
 
+        // The given token has been successfully minted; by who, to whom and how much
+        event Mint(address indexed _minter, address indexed _beneficiary, address indexed _token, uint256 value);
+
         // Mint the specified value of tokens to the specified recipient
         function mintTo(address _beneficiary, uint256 value) external returns (bool);
 
@@ -628,33 +631,33 @@ Solidity interface definition
 Reference implementations  
 - <git://holbrook.no/erc20-demurrage-token.git>
 
-### TokenVend
+### TokenSwap
 
-This interface defines the mechanism for which a specific ERC20 token
-may be exchanged for a different ERC20 token.
-
-A typical use-case is generation of voting tokens based on a momentary
-voucher balance. This is especially useful if the original ERC20 token
-is subject to decay (demurrage).
-
-The tokens used for exchange **SHOULD** be locked for the full duration
-of holding the vended tokens.
-
-The withdrawal function may or may not allow partial withdrawals.
+Token swap interface that can fit token escrow aswell as token swap
+contracts.
 
 ERC165 Interface identifier  
-8a13249c
+9e2d0236
 
 Solidity interface definition  
-    interface ITokenVend {
-        // A new vended token has been created.
-        event TokenCreated(uint256 indexed _tokenIdx, uint256 indexed _supply, address _token);
+    interface ITokenSwap {
+        // Add inToken liquidity of the full balance of the sender
+        // Requires token approval for the balance.
+        function deposit(address _inToken) external returns (uint256);
 
-        // Create corresponding vended tokens for the control token balance of the caller.  
-        function getFor(address _token) external returns (uint256);
+        // Add inToken liquidity to the tune of given value. 
+        // Requires token approval for the corresponding value.
+        function deposit(address _inToken, uint256 _value) external returns (uint256);
 
-        // Recover control tokens that were used to retrieve the corresponding vended tokens.
-        function withdrawFor(address _token) external returns (uint256);
+        // Withdraw any pending outToken balance in the pool for the sender.
+        function withdraw(address _outToken) external returns (uint256);
+
+        // Withdraw pending outToken balance of given value in the pool for the sender.
+        function withdraw(address _outToken, uint256 _value) external returns (uint256);
+
+        // Exchange inToken equalling given value for outToken.
+        // Requires token approval for the value of inToken.
+        function withdraw(address _outToken, address _inToken, uint256 _value) external returns (uint256);
     }
 
 Reference implementations  

solidity/Minter.sol

@@ -8,6 +8,9 @@ interface IMinter {
 	// Tokens are successfully minted; by who, to whom and how much
 	event Mint(address indexed _minter, address indexed _beneficiary, uint256 value);
 
+	// The given token has been successfully minted; by who, to whom and how much
+	event Mint(address indexed _minter, address indexed _beneficiary, address indexed _token, uint256 value);
+
 	// Mint the specified value of tokens to the specified recipient
 	function mintTo(address _beneficiary, uint256 value) external returns (bool);
 

solidity/TokenSwap.sol

@@ -0,0 +1,25 @@
+pragma solidity >=0.6.12;
+
+// Author:	Louis Holbrook <dev@holbrook.no> 0826EDA1702D1E87C6E2875121D2E7BB88C2A746
+// SPDX-License-Identifier:	AGPL-3.0-or-later
+// File-version: 1
+
+interface ITokenSwap {
+	// Add inToken liquidity of the full balance of the sender
+	// Requires token approval for the balance.
+	function deposit(address _inToken) external returns (uint256);
+
+	// Add inToken liquidity to the tune of given value. 
+	// Requires token approval for the corresponding value.
+	function deposit(address _inToken, uint256 _value) external returns (uint256);
+
+	// Withdraw any pending outToken balance in the pool for the sender.
+	function withdraw(address _outToken) external returns (uint256);
+
+	// Withdraw pending outToken balance of given value in the pool for the sender.
+	function withdraw(address _outToken, uint256 _value) external returns (uint256);
+
+	// Exchange inToken equalling given value for outToken.
+	// Requires token approval for the value of inToken.
+	function withdraw(address _outToken, address _inToken, uint256 _value) external returns (uint256);
+}