* Allow specifying local accounts via CLI
* Add `tx-queue-locals` CLI option
* ethcore: modify miner to check options vec before importing transaction
* modify tests (ethcore/parity)
Resolves#9634
* fix formatting
* fixes: Make prefer HashSet over Vec<>, add test, comment formatting
* Update ethcore/src/miner/miner.rs
Co-Authored-By: insipx <aplaza@liquidthink.net>
* Fix comments and add helper for set->vec conversion
* remove blank line from use statement
* fix helper test
* formatting
* fix test to pass on nightly
* revert test fix for nightly
* added BlockChainReset trait, client impl, and cli interface
* show block hashes to be deleted and new best block, update best block in db, better cli interface
* delete BlockNumber from COL_EXTRA
* add TODO comment
* add BlockReciepts to imports
* refactor block_headers_from_best_block, better cli documentation
* exit gracefully if reset arg isn't supplied
* fix cli usage macro
* removed stray int literals
* use Vec::with_capacity
Co-Authored-By: seunlanlege <seunlanlege@gmail.com>
* cast n to usize
* correct imports
* make db reset arg required
* Clean up serde rename and use rename_all = camelCase when possible
* snake_case for pricing
* Use camelcase for engine
* Use camel case for seal
* Use camel case for validator set
* Use camel case for confirmation payload
* Use camel case for consensus status
* Use camel case for nodekind
* Use kebab case for provenance
* Use camel case for pubsub
* Use lowercase and camelcase for trace
* Use camel case for whisper
* rename Ethash as irregular name
* OnDemand no longer loop until there is a query.
All peer known at the time will be queried, and the query fail if all
return no reply.
Returning the failure is done through an empty Vec of reply (the type
of the oneshot channel remains unchanged).
Before this commit the query were send randomly to any peer until there
is a reply (for a query that got no result it was an issue, for other
queries it was quering multiple times the same peers).
After this commit the first query is random but next queries
follows hashmap iterator order.
Test no_capability was broken by this commit (the pending query was
removed).
* OnDemand no longer loop until there is a query.
All peer known at the time will be queried, and the query fail if all
return no reply.
Returning the failure is done through an empty Vec of reply (the type
of the oneshot channel remains unchanged).
Before this commit the query were send randomly to any peer until there
is a reply (for a query that got no result it was an issue, for other
queries it was quering multiple times the same peers).
After this commit the first query is random but next queries
follows hashmap iterator order.
Test no_capability was broken by this commit (the pending query was
removed). If adding some kind of timeout mechanism it could be restored.
* Comment plus better field names.
* No panick on dropped oneshot channel.
* Use Set to avoid counter heuristic
* Cli option `on_demand_nb_retry` for maximum number of retry when doing
on demand query in light client.
* Missing test update for previous commit
* Add a timeout (only when there is no peer to query), that way we do not
set number of query to minimum current number peer or configured number
of query : that way capability test was restored.
* Adding an error type for on_demand, it helps having variant of error
reported at rpc level : choice of rpc error code error might not be
right.
* Duration as constant is nice
* Switch to duration in main too
* Fix indentation (sorry for that).
* Fix error management (bad merge in previous commit)
* Lots of english corrections, major change on the new command parameters :
- use standard '-' instead of '_'
- renaming nb_retry params to 'on-demand-retry-count'
* Added --tx-queue-no-early-reject flag to disable early tx queue rejects because of low gas price
* Fixed failing tests, clarified comments and simplified no_early_reject field name.
* Added test case for the --tx-queue-no-early-reject flag
* Remove the dapps system from Parity
* Move node-health outside of dapps
* Fix set dapps list test
* Update Cargo.lock
* Deprecate options
* Add _legacy_ prefixes in Dapps
* Fix tests
* Fix deprecatedness of dapps-path
* CHECK macro to replace hard-coded checks
* Clean up deprecated options
* typo: FlAG -> FLAG
* Fix tests
* Deprecated non-used ui params default is None
* test: arg_ui_path is not deprecated
* arg_ui_port should be None
* Address grumbles
* Fix tests
* Add option for user to set max size limit for RPC requests as requested in #8961.
* Add max_payload to tests.
* Change name for max payload option and change value from NUM to MB.
* Fix broken test.
* Fix incorrect indentation.
* Add tx_queue_allow_unknown_local config option
- Previous commit messages:
dispatcher checks if we have the sender account
Add `tx_queue_allow_unknown_local` to MinerOptions
Add `tx_queue_allow_unknown_local` to config
fix order in MinerOptions to match Configuration
add cli flag for tx_queue_allow_unknown_local
Update refs to `tx_queue_allow_unknown_local`
Add tx_queue_allow_unknown_local to config test
revert changes to dispatcher
Move tx_queue_allow_unknown_local to `import_own_transaction`
Fix var name
if statement should return the values
derp de derp derp derp semicolons
Reset dispatch file to how it was before
fix compile issues + change from FLAG to ARG
add test and use `into`
import MinerOptions, clone the secret
Fix tests?
Compiler/linter issues fixed
Fix linter msg - case of constants
IT LIVES
refactor to omit yucky explict return
update comments
Fix based on diff AccountProvider.has_account method
* Refactor flag name + don't change import_own_tx behaviour
fix arg name
Note: force commit to try and get gitlab tests working again 😠
* Add fn to TestMinerService
* Avoid race condition from trusted sources
- refactor the miner tests a bit to cut down on code reuse
- add `trusted` param to dispatch_transaction and import_claimed_local_transaction
Add param to `import_claimed_local_transaction`
Fix fn sig in tests
* Update `add_license` script
* run script
* add `remove duplicate lines script` and run it
* Revert changes `English spaces`
* strip whitespaces
* Revert `GPL` in files with `apache/mit license`
* don't append `gpl license` in files with other lic
* Don't append `gpl header` in files with other lic.
* re-ran script
* include c and cpp files too
* remove duplicate header
* rebase nit
* Remove public node related settings
* Fix tests
* Unwrap accounts provider in all rpc apis
* Unwrap AccountProvider in all cli places
* Fix rpc tests
Additionally as to the port, the new command line option
now allows the user to specify the network interface the P2P-Parity
listens, too. With support for 'all' and 'local' like in all other
versions of this flag. Default is 'all' (aka ).
