* Merge pull request #7368 from paritytech/td-future-blocks
Wait for future blocks in AuRa
* Fix tracing failed calls.
* Problem: sending any Whisper message fails
The error is "PoW too low to compete with other messages"
This has been previously reported in #7144
Solution: prevent the move semantics
The source of the error is in PoolHandle.relay
implementation for NetPoolHandle.
Because of the move semantics, `res` variable is in fact
copied (as it implements Copy) into the closure and for
that reason, the returned result is always `false.
* Merge pull request #7433 from paritytech/td-strict-config
Strict config parsing
* Problem: AuRa's unsafeties around step duration (#7282)
Firstly, `Step.duration_remaining` casts it to u32, unnecesarily
limiting it to 2^32. While theoretically this is "good enough" (at 3
seconds steps it provides room for a little over 400 years), it is
still a lossy way to calculate the remaining time until the next step.
Secondly, step duration might be zero, triggering division by zero
in `Step.calibrate`
Solution: rework the code around the fact that duration is
typically in single digits and never grows, hence, it can be represented
by a much narrower range (u16) and this highlights the fact that
multiplying u64 by u16 will only result in an overflow in even further
future, at which point we should panic informatively (if anybody's
still around)
Similarly, panic when it is detected that incrementing the step
counter wrapped around on the overflow of usize.
As for the division by zero, prevent it by making zero an invalid
value for step duration. This will make AuRa log the constraint
mismatch and panic (after all, what purpose would zero step duration
serve? it makes no sense within the definition of the protocol,
as finality can only be achieved as per the specification
if messages are received within the step duration, which would violate
the speed of light and other physical laws in this case).
* Merge pull request #7437 from paritytech/a5-chains-expanse
Remove expanse chain
* Expanse Byzantium update w/ correct metropolis difficulty increment divisor (#7463)
* Byzantium Update for Expanse
Here the changes go. Hope I didnt miss anything.
* expip2 changes - update duration limit
* Fix missing EXPIP-2 fields
* Format numbers as hex
* Fix compilation errors
* Group expanse chain spec fields together
* Set metropolisDifficultyIncrementDivisor for Expanse
* Revert #7437
* Add Expanse block 900_000 hash checkpoint
* Advance AuRa step as far as we can and prevent invalid blocks. (#7451)
* Advance AuRa step as far as we can.
* Wait for future blocks.
* fixed panic when io is not available for export block, closes#7486 (#7495)
* Update Parity Mainnet Bootnodes (#7476)
* Update Parity Mainnet Bootnodes
* Replace the Azure HDD bootnodes with the new ones :)
* Use https connection (#7503)
Use https when connecting to etherscan.io API for price-info
* Expose default gas price percentile configuration in CLI (#7497)
* Expose gas price percentile.
* Fix light eth_call.
* fix gas_price in light client
* separate migration from util and make its dependencies into libs:
* snappy
* kvdb
* error
* common
* renamed common -> macros
* util error does not depend on snappy module
* ethsync does not depend on util nor ethcore_error
* nibbleslice and nibblevec merged with patricia_trie crate
* removed unused dependencies from util
* util journaldb traits does not need to be public
* util_error
* fixed ethcore compile error
* ignore .swo files
* Update chain.rs
* rpc: transaction/receipt requests made async
* rpc: light client fetches transaction and uncle by hash/index
* on_demand: request type for transaction index
* serve transaction index requests in light protocol
* add a test for transaction index serving
* fetch transaction and receipts by hash on light client
* fix decoding tests
* light: more lenient cost table parsing (backwards compatible)
* fix tests and warnings
* LES -> PIP
* Update provider.rs
* proper doc comments for public functions
* Bump version.
* Fix RPC crate.
* Fix BoxFuture in crates.
* Compiles and passes tests!
* Get rid of .boxed()
* Fixing issues with the UI.
* Remove minihttp. Support threads.
* Reimplement files serving to do it in chunks.
* Increase chunk size.
* Remove some unecessary copying.
* Fix tests.
* Fix stratum warning and ipfs todo.
* Switch to proper branch of jsonrpc.
* Update Cargo.lock.
* Update docs.
* Include dapps-glue in workspace.
* fixed merge artifacts
* Fix test compilation.
* Optional offset and count added on client level
* Rpc interface extended
* Tests corrected
* Filtering code refactored a little bit
* Offset type was changed to usize
* Handling of block hash in offset added
* Offset reworked to number
* Trailing comma removed
* Import for Quantity type added
* Offset and count moved into filter object
* Lost comma removed
* Return empty vec instead of None in case of incorrect range
* move common forks and parameters to common params
* port specs over to new format
* fix RPC tests
* parity-machine skeleton
* remove block type
* extract out ethereum-specific methods into EthereumMachine
* beginning to integrate Machine into engines. dealing with stale transitions in Ethash
* initial porting to machine
* move block reward back into engine
* abstract block reward logic
* move last hash and DAO HF logic into machine
* begin making engine function parameters generic
* abstract epoch verifier and ethash block reward logic
* instantiate special ethereummachine for ethash in spec
* optional full verification in verify_block_family
* re-instate tx_filter in a way that works for all engines
* fix warnings
* fix most tests, further generalize engine trait
* uncomment nullengine, get ethcore tests compiling
* fix warnings
* update a bunch of specs
* re-enable engine signer, validator set, and transition handler
* migrate basic_authority engine
* move last hashes into executedblock
* port tendermint
* make all ethcore tests pass
* json-tests compilation
* fix RPC tests: change in gas limit for new block changed PoW hash
* fix minor grumbles
* validate chainspecs
* fix broken import
* fix transaction verification for pre-homestead
* Add RPC eth_chainId for querying the current blockchain chain ID
Currently although we can use `net_version` RPC call to get the
current network ID, there's no RPC for querying the chain ID. This
makes it impossible to determine the current actual blockchain using
the RPC. An ETH/ETC client can accidentally connect to an ETC/ETH RPC
endpoint without knowing it unless it tries to sign a transaction or
it fetch a transaction that is known to have signed with a chain
ID. This has since caused trouble for application developers, such as
MetaMask, to add multi-chain support.
The same RPC endpoint is also about to be merged for ETC's
go-ethereum: https://github.com/ethereumproject/go-ethereum/pull/336
* Add eth_chainId to js's web3 interface
* Add a mocked test for eth_chainId
* Add chainId in js's jsonrpc interfaces
* Change return type for eth_chainId to `Option<u64>`
* Change name eth_chainId to parity_chainId
* Wrong test name and missed var for rpc_parity_chain_id test
* Use U256 to return chainId and fix for master
u64 returns decimal integer, and there seems to be no type called
U64. So here I use U256 to return the hex integer.
* Fix chainID test
Before EIP155 fork number, chainID should be null.
* Change both parity_chainId and transaction::chainId to use U64
This makes it consistent that all chain ids returned are hex string.
* Fix wrong U64 serialization
* Rebase and fix compilation errors (tests not yet fixed)
* Use `debug_assert` over `assert`
* Fix tests
* Assert safety, clean up
* Fix up stale cache removal, move one assert to debug_assert
* Remove printlns
* Add licenses
* Fix benches
* Inline some no-ops in a hot loop that weren't being inlined
* Add spooky comment to make sure no-one removes the inlining annotations
* Minor cleanup
* Add option to switch between mmap and ram
* Flag ethash to use less memory when running light client
* Fix tests
* Remove todo comment (it's done)
* Replace assertion with error return
* Fix indentation
* Use union instead of `transmute`
* Fix benches
* Extract to constants
* Clean up and fix soundness holes
* Fix formatting
* Ignore missing-file errors
* Make incorrect cache size an error condition instead of a panic, remove dead code
* Fix compilation errors from rebase
* Fix compilation errors in tests
* Fix compilation errors in tests
* Copy modal from keepkey branch and generalize
The keepkey PinMatrix modal needs to be the same for Trezor, but we
should probably try to keep it general since it can be used for both.
* Add trezor communication code
This is a result of much trial-and-error and a couple of dead-ends in
how to communicate and wire everything up.
Code here is still a bit WIP with lots of debug prints and stuff.
The test works though, it is possible to sign a transaction.
* Extend the basic lib to allow Trezor
This is kind of ugly and needs some cleanup and generalization. I’ve
just copy-pasted some things to bring in the trezor wallets. I’ve also
had to add a lock to the USB API so that only one thing talks to the
USB at once.
* Add RPC plumbing needed
We need to be able to get “locked” devices from the frontend to figure
out if we’re going to display the PinMatrix or not. Then we need to be
able to send a pin to a device.
* Add logic to query backend for Trezor and display PinMatrix
There’s a bug somewhere here because signing a transaction fails if you
take too long to press the confirm button on the device.
* Change back to paritytech branch
As my fork has been merged in.
* Converting spaces to tabs, as it should be
* Incorporate correct handling of EIP-155
Turns out the Trezor was adjusting the v part of the signature, and
we’re already doing that so it was done twice.
* Some circular logic here that was incorrect
BE-encoded U256 is almost the same as RLP encoded without the
size-byte, except for <u8 sized values. What’s really done is
BE-encoded U256 and then left-trimmed to the smallest size. Kind of
obvious in hindsight.
* Resolve issue where not clicking fast enough fails
The device will not repeat a ButtonRequest when you read from it, so
you need to have a blocking `read` for whatever amount of time that you
want to give the user to click. You could also have a shorter timeout
but keep retrying for some amount of time, but it would amount to the
same thing.
* Scan after pin entry to make accepting it faster
* Remove ability to cancel pin request
* Some slight cleanup
* Probe for the correct HID Version to determine padding
* Move the PinMatrix from Accounts to Application
* Removing unused dependencies
* Mistake in copying over stuff from keepkey branch
* Simplify FormattedMessage
* Move generated code to external crate
* Remove ethcore-util dependency
* Fix broken import in test
This test is useless without a connected Trezor, not sure how to make
it useful without one.
* Merge branch 'master' into fh-4500-trezor-support
# Conflicts:
# rpc/src/v1/helpers/dispatch.rs
* Ignore test that can't be run without trezor device
* Fixing grumbles
* Avoiding owning data in RPC method
* Checking for overflow in v part of signature
* s/network_id/chain_id
* Propagating an error from the HID Api
* Condensing code a little bit
* Fixing UI.
* Debugging trezor.
* Minor styling tweak
* Make message type into an actual type
This makes the message type that the RPC message accepts into an actual
type as opposed to just a string, based on feedback. Although I’m not
100% sure this has actually improved the situation.
Overall I think the hardware wallet interface needs some refactoring
love.
* Split the trezor RPC endpoint
It’s split into two more generic endpoints that should be suitable for
any hardware wallets with the same behavior to sit behind.
* Reflect RPC method split in javascript
* Fix bug with pin entry
* Fix deadlock for Ledger
* Avoid having a USB lock in just listing locked wallets
* Fix javascript issue (see #6509)
* Replace Mutex with RwLock
* Update Ledger test
* Fix typo causing faulty signatures (sometimes)
* *Actually* fix tests
* Update git submodule
Needed to make tests pass
* Swap line orders to prevent possible deadlock
* Make setPinMatrixRequest an @action
* Node-health to a separate crate.
* Initialize node_health outside of dapps.
* Expose health over RPC.
* Bring back 412 and fix JS.
* Add health to workspace and tests.
* Fix compilation without default features.
* Fix borked merge.
* Revert to generics to avoid virtual calls.
* Fix node-health tests.
* Add missing trailing comma.
* RwLock
* getting there
* argh
* parking_lot
* rpc
* wax on wax off
* almost there
* remove lock
* write over read
* works
* linting
* small updates
* dissapearing act
* router update
* complete
* one m
* grumbles1
* grumbles part II
* parking_lot->util
* missed test case
* fied package-lock.json
* small fixes
* 404 tests failing
* cleanup
* cleanup 2
* updates and the likes
* play
* simplify filter
* f-ing bugs
* read->write
* Address own grumbles.
* Fix test.
