* Hardware-wallet/usb-subscribe-refactor (#7860)
* Hardware-wallet fix
* More fine-grained initilization of callbacks by vendorID, productID and usb class
* Each device manufacturer gets a seperate handle thread each
* Replaced "dummy for loop" with a delay to wait for the device to boot-up properly
* Haven't been very carefully with checking dependencies cycles etc
* Inline comments explaining where shortcuts have been taken
* Need to test this on Windows machine and with Ledger (both models)
Signed-off-by: niklasad1 <niklasadolfsson1@gmail.com>
* Validate product_id of detected ledger devices
* closed_device => unlocked_device
* address comments
* add target in debug
* Address feedback
* Remove thread joining in HardwareWalletManager
* Remove thread handlers in HardwareWalletManager because this makes them unused
* fixed broken logs (#7934)
* fixed broken logs
* bring back old lock order
* removed bloom groups from blockchain
* revert unrelated changes
* simplify blockchain_block_blooms
* Bump WS (#7952)
* Calculate proper keccak256/sha3 using parity. (#7953)
* Increase max download limit to 128MB (#7965)
* fetch: increase max download limit to 64MB
* parity: increase download size limit for updater service
* Detect too large packets in snapshot sync. (#7977)
* fix traces, removed bloomchain crate, closes#7228, closes#7167 (#7979)
* Remvoe generator.rs
* Make block generator easier to use (#7888)
* Make block generator easier to use
* applied review suggestions
* rename BlockMetadata -> BlockOptions
* removed redundant uses of blockchain generator and genereator.next().unwrap() calls
While the standard defined by Trezor as the default derivation path here
https://blog.trezor.io/trezor-integration-with-myetherwallet-3e217a652e08
says that it should be `m/44'/60'/0`, in practice they don't have an
implementation of a wallet for Ethereum themselves and refer customers
to MEW.
MEW has a custom implementation of the path derivation logic that allows them to
generate multiple addresses by essentially adding `/0`, `/1` etc to the path.
In my initial implementation of Trezor I didn't take this into
consideration unfortunately and just used the keypath that Trezor
themselves recommended. However, given that it's seemingly standard
practice to append `/0` for a "sub-address" (and this is what we've done
for Ledger as well) it seems like a mistake on my part to not take that
into consideration.
Unfortunately, anyone who has used their Trezor device with Parity
previously would now see a different address when they connect the
Trezor device the next time. The only way they would have to access the
old address is to use an old version, or by going through MEW and
selecting the Ledger keypath.
Also see #6811
* Bump version.
* Fix RPC crate.
* Fix BoxFuture in crates.
* Compiles and passes tests!
* Get rid of .boxed()
* Fixing issues with the UI.
* Remove minihttp. Support threads.
* Reimplement files serving to do it in chunks.
* Increase chunk size.
* Remove some unecessary copying.
* Fix tests.
* Fix stratum warning and ipfs todo.
* Switch to proper branch of jsonrpc.
* Update Cargo.lock.
* Update docs.
* Include dapps-glue in workspace.
* fixed merge artifacts
* Fix test compilation.
* Copy modal from keepkey branch and generalize
The keepkey PinMatrix modal needs to be the same for Trezor, but we
should probably try to keep it general since it can be used for both.
* Add trezor communication code
This is a result of much trial-and-error and a couple of dead-ends in
how to communicate and wire everything up.
Code here is still a bit WIP with lots of debug prints and stuff.
The test works though, it is possible to sign a transaction.
* Extend the basic lib to allow Trezor
This is kind of ugly and needs some cleanup and generalization. I’ve
just copy-pasted some things to bring in the trezor wallets. I’ve also
had to add a lock to the USB API so that only one thing talks to the
USB at once.
* Add RPC plumbing needed
We need to be able to get “locked” devices from the frontend to figure
out if we’re going to display the PinMatrix or not. Then we need to be
able to send a pin to a device.
* Add logic to query backend for Trezor and display PinMatrix
There’s a bug somewhere here because signing a transaction fails if you
take too long to press the confirm button on the device.
* Change back to paritytech branch
As my fork has been merged in.
* Converting spaces to tabs, as it should be
* Incorporate correct handling of EIP-155
Turns out the Trezor was adjusting the v part of the signature, and
we’re already doing that so it was done twice.
* Some circular logic here that was incorrect
BE-encoded U256 is almost the same as RLP encoded without the
size-byte, except for <u8 sized values. What’s really done is
BE-encoded U256 and then left-trimmed to the smallest size. Kind of
obvious in hindsight.
* Resolve issue where not clicking fast enough fails
The device will not repeat a ButtonRequest when you read from it, so
you need to have a blocking `read` for whatever amount of time that you
want to give the user to click. You could also have a shorter timeout
but keep retrying for some amount of time, but it would amount to the
same thing.
* Scan after pin entry to make accepting it faster
* Remove ability to cancel pin request
* Some slight cleanup
* Probe for the correct HID Version to determine padding
* Move the PinMatrix from Accounts to Application
* Removing unused dependencies
* Mistake in copying over stuff from keepkey branch
* Simplify FormattedMessage
* Move generated code to external crate
* Remove ethcore-util dependency
* Fix broken import in test
This test is useless without a connected Trezor, not sure how to make
it useful without one.
* Merge branch 'master' into fh-4500-trezor-support
# Conflicts:
# rpc/src/v1/helpers/dispatch.rs
* Ignore test that can't be run without trezor device
* Fixing grumbles
* Avoiding owning data in RPC method
* Checking for overflow in v part of signature
* s/network_id/chain_id
* Propagating an error from the HID Api
* Condensing code a little bit
* Fixing UI.
* Debugging trezor.
* Minor styling tweak
* Make message type into an actual type
This makes the message type that the RPC message accepts into an actual
type as opposed to just a string, based on feedback. Although I’m not
100% sure this has actually improved the situation.
Overall I think the hardware wallet interface needs some refactoring
love.
* Split the trezor RPC endpoint
It’s split into two more generic endpoints that should be suitable for
any hardware wallets with the same behavior to sit behind.
* Reflect RPC method split in javascript
* Fix bug with pin entry
* Fix deadlock for Ledger
* Avoid having a USB lock in just listing locked wallets
* Fix javascript issue (see #6509)
* Replace Mutex with RwLock
* Update Ledger test
* Fix typo causing faulty signatures (sometimes)
* *Actually* fix tests
* Update git submodule
Needed to make tests pass
* Swap line orders to prevent possible deadlock
* Make setPinMatrixRequest an @action
* updated docopt, env_logger, semver and regex crates
* updated parking_lot to 0.4
* fixed compiling on linux
* updated igd to 0.6
* updated jsonrpc
* fixed regex related compiler error on linux
