* parity-version: bump beta to 2.0.2
* remove ssl from dockerfiles, closes#8880 (#9195)
* snap: remove ssl dependencies from snapcraft definition (#9222)
* parity-version: bump beta to 2.0.3
* Remove all dapp permissions related settings (#9120)
* Completely remove all dapps struct from rpc
* Remove unused pub use
* Remove dapp policy/permission func in ethcore
* Remove all dapps settings from rpc
* Fix rpc tests
* Use both origin and user_agent
* Address grumbles
* Address grumbles
* Fix tests
* Check if synced when using eth_getWork (#9193) (#9210)
* Check if synced when using eth_getWork (#9193)
* Don't use fn syncing
* Fix identation
* Fix typo
* Don't check for warping
* rpc: avoid calling queue_info twice on eth_getWork
* Fix potential as_usize overflow when casting from U256 in miner (#9221)
* Allow old blocks from peers with lower difficulty (#9226)
Previously we only allow downloading of old blocks if the peer
difficulty was greater than our syncing difficulty. This change allows
downloading of blocks from peers where the difficulty is greater then
the last downloaded old block.
* Update Dockerfile (#9242)
* Update Dockerfile
fix Docker build
* fix dockerfile paths: parity -> parity-ethereum (#9248)
* Propagate transactions for next 4 blocks. (#9265)
Closes#9255
This PR also removes the limit of max 64 transactions per packet, currently we only attempt to prevent the packet size to go over 8MB. This will only be the case for super-large transactions or high-block-gas-limit chains.
Patching this is important only for chains that have blocks that can fit more than 4k transactions (over 86M block gas limit)
For mainnet, we should actually see a tiny bit faster propagation since instead of computing 4k pending set, we only need `4 * 8M / 21k = 1523` transactions.
Running some tests on `dekompile` node right now, to check how it performs in the wild.
* Update tobalaba.json (#9313)
* Fix load share (#9321)
* fix(light_sync): calculate `load_share` properly
* refactor(api.rs): extract `light_params` fn, add test
* style(api.rs): add trailing commas
* ethcore: fix pow difficulty validation (#9328)
* ethcore: fix pow difficulty validation
* ethcore: validate difficulty is not zero
* ethcore: add issue link to regression test
* ethcore: fix tests
* ethcore: move difficulty_to_boundary to ethash crate
* ethcore: reuse difficulty_to_boundary and boundary_to_difficulty
* ethcore: fix grumbles in difficulty_to_boundary_aux
* Light client `Provide default nonce in transactions when it´s missing` (#9370)
* Provide `default_nonce` in tx`s when it´s missing
When `nonce` is missing in a `EthTransaction` will cause it to fall in
these cases provide `default_nonce` value instead!
* Changed http:// to https:// on Yasm link (#9369)
Changed http:// to https:// on Yasm link in README.md
* Provide `default_nonce` in tx`s when it´s missing
When `nonce` is missing in a `EthTransaction` will cause it to fall in
these cases provide `default_nonce` value instead!
* Address grumbles
* ethcore: kovan: delay activation of strict score validation (#9406)
* Better support for eth_getLogs in light mode (#9186)
* Light client on-demand request for headers range.
* Cache headers in HeaderWithAncestors response.
Also fulfills request locally if all headers are in cache.
* LightFetch::logs fetches missing headers on demand.
* LightFetch::logs limit the number of headers requested at a time.
* LightFetch::logs refactor header fetching logic.
* Enforce limit on header range length in light client logs request.
* Fix light request tests after struct change.
* Respond to review comments.
* Add update docs script to CI (#9219)
* Add update docs script to CI
Added a script to CI that will use the jsonrpc tool to update rpc
documentation then commit and push those to the wiki repo.
* fix gitlab ci lint
* Only apply jsonrpc docs update on tags
* Update gitlab-rpc-docs.sh
* Copy correct parity repo to jsonrpc folder
Copy correct parity repo to jsonrpc folder before attempting to build docs since the CI runner clones the repo as parity and not parity-ethereum.
* Fix JSONRPC docs CI job
Update remote config in wiki repo before pushing changes using a github
token for authentication. Add message to wiki tag when pushing changes.
Use project directory to correctly copy parity code base into the
jsonrpc repo for doc generation.
* Fix set_remote_wiki function call in CI
* Prevent blockchain & miner racing when accessing pending block. (#9310)
* Prevent blockchain & miner racing when accessing pending block.
* Fix unavailability of pending block during reseal.
* Prevent sync restart if import queue full (#9381)
* Add POA Networks: Core and Sokol (#9413)
* ethcore: add poa network and sokol chainspecs
* rpc: simplify chain spec docs
* cli: rearrange networks by main/test and size/range
* parity: don't blacklist 0x00a328 on sokol testnet
* parity: add sokol and poanet to params and clean up a bit, add tests
* ethcore: add the poa networks and clean up a bit
* ethcore: fix path to poacore chain spec
* parity: rename poa networks to poacore and poasokol
* parity: fix configuration tests
* parity: fix parameter tests
* ethcore: rename POA Core and POA Sokol
* Update tobalaba.json (#9419)
* Update hardcoded sync (#9421)
- Update foundation hardcoded header to block 6219777
- Update ropsten hardcoded header to block 3917825
- Update kovan hardcoded header to block 8511489
* Update `add_license` script
* run script
* add `remove duplicate lines script` and run it
* Revert changes `English spaces`
* strip whitespaces
* Revert `GPL` in files with `apache/mit license`
* don't append `gpl license` in files with other lic
* Don't append `gpl header` in files with other lic.
* re-ran script
* include c and cpp files too
* remove duplicate header
* rebase nit
* Allow post-homestead forks to be specified in CommonParams
* Fix all json configs
* Fix test in json crate
* Fix test in ethcore
* Fix all chain configs to use tabs
Given we use tabs in .editorconfig and the majority of chain configs.
This change is done in Emacs using `mark-whole-buffer` and `indent-region`.
* Add SHL, SHR, SAR opcodes
* Add have_bitwise_shifting schedule flag
* Add all EIP tests for SHL
* Add SHR implementation and tests
* Implement SAR and add tests
* Add eip145transition config param
* Change map_or to map_or_else when possible
* Add validate_non_zero function
It's used to validate that a Spec's uint field used as a divisor is not zero.
* Add deserialize_with to gas_limit_bound_divisor
Prevents panics due to divide-by-zero on the gas_limit_bound_divisor
field.
* Add deserialize_with to difficulty_bound_divisor
Prevents panics due to divide-by-zero on the difficulty_bound_divisor
field.
* Add validate_optional_non_zero function
Used to validate Option<Uint> divisor fields.
* Use deserialize_with on optional divisor fields.
* Add #[serde(default)] attribute to divisor fields
When using `#[serde(deserialize_with)]`, `#[serde(default)]` must be specified so that missing
fields can be deserialized with the deserializer for `None`.
* aura: broadcast empty step message instead of sealing empty block
* aura: add empty_step messages to seal
* aura: include parent_hash in empty step message
* aura: verify received empty step messages
* aura: verify empty step messages in block
* aura: fix dead lock on empty_steps
* aura: fix EmptyStep Encodable
* aura: take number of empty steps into account in chain score
* aura: use empty step signers for finality
* aura: add empty "empty step" messages to seal when reading from spec
* aura: fix EmptyStep rlp encoding
* aura: use Vec<u8> instead of Bytes
* aura: fix block empty step verification
* Update .gitlab-ci.yml
fix lint
* aura: fix accumulation of empty step signatures for finality
* aura: include empty steps in seal signature
* aura: configurable max number of empty steps
* engine: pass block header to seal_fields method
This is necessary to make the number of seal fields dynamic,
e.g. activating a transition on a certain block number that changes
the seal.
* aura: add transition to enable empty step messages
* aura: clear old empty step messages on verify_block_external
* aura: ignore empty step messages from the future
* aura: report skipped primaries when empty steps are not enabled
* aura: fix tests
* aura: report misbehavior
* aura: add tests for rolling finality with multiple signatures
* engine: fix validator set test
In this test the block validation wasn't failing because the block was in the
future (expected failure) but was instead failing because the author of the
block isn't the expected authority. Since we added reporting of blocks produced
by the wrong authority this test started failing.
* aura: reward all the authors of empty step messages
* aura: fix reward attribution for new blocks
* aura: add tests for empty steps broadcasting and inclusion in blocks
* aura: reduce size of empty step messages in seal
* aura: add test for empty step inclusion in blocks
* aura: add test for rewarding of empty steps
* aura: add test for empty steps validation
* aura: fix rlp encoding of sealed empty step
* aura: fix grumbles
* Refactor updater to use ethabi-derive
* Grumble: do_call type alias
* Empty commit to trigger test re-run
* migration to ethabi-5.0
* migration to ethabi-5.0 in progress
* use ethabi_deriven to generate TransactAcl contract
* use ethabi_deriven to generate Registry contract
* hash-fetch uses ethabi_derive, removed retain cycle from updater, fixed#7720
* node-filter crate uses ethabi_derive to generate peer_set contract interface
* use LruCache in node-filter instead of HashMap
* validator_set engine uses ethabi_derive
* ethcore does not depend on native_contracts
* miner does no depend on native_contracts
* secret_store does not use native_contracts (in progress)
* removed native-contracts
* ethcore and updater does not depend on futures
* updated ethereum-types
* fixed all warnings caused by using new version of ethereum-types
* updated ethabi_derive && ethabi_contract to get rid of warnings
* removed another retain cycle in updater, fixed following minor version on update
* moved contracts out of native_contracts res
* updated ethabi_contract
* fixed failing test
* fixed failing test
* there is no need to create two contracts of the same kind any more
* simplify updater::ReleaseTrack conversion into u8 and add several tests for it
* applied review suggestions
* applied review suggestions
Firstly, `Step.duration_remaining` casts it to u32, unnecesarily
limiting it to 2^32. While theoretically this is "good enough" (at 3
seconds steps it provides room for a little over 400 years), it is
still a lossy way to calculate the remaining time until the next step.
Secondly, step duration might be zero, triggering division by zero
in `Step.calibrate`
Solution: rework the code around the fact that duration is
typically in single digits and never grows, hence, it can be represented
by a much narrower range (u16) and this highlights the fact that
multiplying u64 by u16 will only result in an overflow in even further
future, at which point we should panic informatively (if anybody's
still around)
Similarly, panic when it is detected that incrementing the step
counter wrapped around on the overflow of usize.
As for the division by zero, prevent it by making zero an invalid
value for step duration. This will make AuRa log the constraint
mismatch and panic (after all, what purpose would zero step duration
serve? it makes no sense within the definition of the protocol,
as finality can only be achieved as per the specification
if messages are received within the step duration, which would violate
the speed of light and other physical laws in this case).
* move common forks and parameters to common params
* port specs over to new format
* fix RPC tests
* parity-machine skeleton
* remove block type
* extract out ethereum-specific methods into EthereumMachine
* beginning to integrate Machine into engines. dealing with stale transitions in Ethash
* initial porting to machine
* move block reward back into engine
* abstract block reward logic
* move last hash and DAO HF logic into machine
* begin making engine function parameters generic
* abstract epoch verifier and ethash block reward logic
* instantiate special ethereummachine for ethash in spec
* optional full verification in verify_block_family
* re-instate tx_filter in a way that works for all engines
* fix warnings
* fix most tests, further generalize engine trait
* uncomment nullengine, get ethcore tests compiling
* fix warnings
* update a bunch of specs
* re-enable engine signer, validator set, and transition handler
* migrate basic_authority engine
* move last hashes into executedblock
* port tendermint
* make all ethcore tests pass
* json-tests compilation
* fix RPC tests: change in gas limit for new block changed PoW hash
* fix minor grumbles
* validate chainspecs
* fix broken import
* fix transaction verification for pre-homestead
* final engine changes
* migration to v13
* adding and removing pending transitions
* epoch_transition_for
* port snapshot to new engine methods
* final validator set interface
* fix compiler errors
* revert v13/epoch_depth transition
* make call on new epoch
* rolling finality checker
* tests for finality checker
* constructing finality proof upon pending transition
* fix warnings and finality proof checking
* fix compiler warnings in tests
* test fixes
* don't include genesis in finality checking
* change snapshot test chain building logic
* minor refactorings
* fetch epoch transition based on parent, fix divide-by-zero in SimpleList
* fix formatting
* fix ABIs and finality checking in snapshot restoration
* encode signal number in proof
* create more blocks at the end of tests
* update gist to accurate contract code
* test for epoch_transition_for
* fix tests with immediateTransitions parameter
* disable force flag after forcing
* rename ValidatorsChanged to InitiateChange and finalizeSignal to finalizeChange
* a few more validator set tests
* Ethereum Classic Monetary Policy
Create a new parameter `ecip1017EraRounds`. When the block number
passes one era rounds, the reward is reduced by 20%.
See https://github.com/ethereumproject/ECIPs/blob/master/ECIPs/ECIP-1017.md
* Update rewards for uncle miners for ECIP1017
In the monetary policy, the rewards are changed from "up to 7/8 of the
reward" to "1/32 of the reward".
* Fix an off-by-one error in ECIP1017 era calculation
According to
https://github.com/ethereumproject/ECIPs/blob/master/ECIPs/ECIP-1017.md,
when in block number 5,000,000, it should still be in Era 1 (which in
our code `era == 0`). So we need to check whether the `rem` equals to
zero and act accordingly when calculating the era.
* `ecip1017_era_rounds` missing from EthashParams when run in build bot
* strip out ecip1017_eras_block_reward function and add unit test
