46 lines
1.7 KiB
Smarty
46 lines
1.7 KiB
Smarty
# Welcome to the chrony configuration file. See chrony.conf(5) for more
|
||
# information about usuable directives.
|
||
|
||
# This will use (up to):
|
||
# - 4 sources from ntp.ubuntu.com which some are ipv6 enabled
|
||
# - 2 sources from 2.ubuntu.pool.ntp.org which is ipv6 enabled as well
|
||
# - 1 source from [01].ubuntu.pool.ntp.org each (ipv4 only atm)
|
||
# This means by default, up to 6 dual-stack and up to 2 additional IPv4-only
|
||
# sources will be used.
|
||
# At the same time it retains some protection against one of the entries being
|
||
# down (compare to just using one of the lines). See (LP: #1754358) for the
|
||
# discussion.
|
||
#
|
||
# About using servers from the NTP Pool Project in general see (LP: #104525).
|
||
# Approved by Ubuntu Technical Board on 2011-02-08.
|
||
# See http://www.pool.ntp.org/join.html for more information.
|
||
pool ntp.ubuntu.com iburst maxsources 4
|
||
pool 0.ubuntu.pool.ntp.org iburst maxsources 1
|
||
pool 1.ubuntu.pool.ntp.org iburst maxsources 1
|
||
pool 2.ubuntu.pool.ntp.org iburst maxsources 2
|
||
|
||
# This directive specify the location of the file containing ID/key pairs for
|
||
# NTP authentication.
|
||
keyfile /etc/chrony/chrony.keys
|
||
|
||
# This directive specify the file into which chronyd will store the rate
|
||
# information.
|
||
driftfile /var/lib/chrony/chrony.drift
|
||
|
||
# Uncomment the following line to turn logging on.
|
||
#log tracking measurements statistics
|
||
|
||
# Log files location.
|
||
logdir /var/log/chrony
|
||
|
||
# Stop bad estimates upsetting machine clock.
|
||
maxupdateskew 100.0
|
||
|
||
# This directive enables kernel synchronisation (every 11 minutes) of the
|
||
# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
|
||
rtcsync
|
||
|
||
# Step the system clock instead of slewing it if the adjustment is larger than
|
||
# one second, but only in the first three clock updates.
|
||
makestep 1 3
|