# festive: A Constrained Size Output Virtual Machine An attempt at defining a small VM to handle menu interaction for size-constrained clients and servers. Original motivation was to create a simple templating renderer for USSD clients, combined with an agnostic data-retrieval reference that may conceal any level of complexity. ## Opcodes The VM defines the following opcode symbols: * `CATCH ` - Jump to symbol if signal is set (see `signals` below). * `CROAK ` - Clear state and restart execution from top if signal is set (see `signals` below). * `LOAD ` - Execute the code symbol `symbol` and cache the data, constrained to the given `size`. Can be exposed with `MAP` within scope, * `RELOAD ` - Execute a code symbol already loaded by `LOAD` and cache the data, constrained to the previously given `size` for the same symbol. * `MAP ` - Expose a code symbol previously loaded by `LOAD` to the rendering client. Roughly corresponds to the `global` directive in Python. * `MOVE ` - Create a new execution frame, invalidating all previous `MAP` calls. More detailed: After a `MOVE` call, a `BACK` call will return to the same execution frame, with the same symbols available, but all `MAP` calls will have to be repeated. * `HALT` - Stop execution. The remaining bytecode (typically, the routing code for the node) is returned to the invoking function. * `INCMP ` - Compare registered input to `arg`. If match, it has the same side-effects as `MOVE`. In addition, any consecutive `INCMP` matches will be ignored until `HALT` is called. * `MSIZE ` - Set min and max display size of menu part to `num` bytes. * `MOUT ` - Add menu display entry. Each entry should have a matching `INCMP` whose `arg` matches `choice`. `display` is a descriptive text of the menu item. * `MNEXT ` - Define how to display the choice for advancing when browsing menu. * `MPREV ` - Define how to display the choice for returning when browsing menu. ### External code `LOAD` is used to execute code symbols in the host environment. It is loaded with a size constraint, and returned data violating this constraint should generate an error. Any symbol successfully loaded with `LOAD` will be associated with the call stack frame it is loaded. The symbol will be available in the same frame and frames below it. Once the frame goes out of scope (e.g. `BACK` is called in that frame) the symbols should be freed as soon as possible. At this point they are not available to the abandoned scope. Loaded symbols are not automatically exposed to the rendering client. To expose symbols ot the rendering client the `MAP` opcode must be used. The associated content of loaded symbols may be refreshed using the `RELOAD` opcode. `RELOAD` only works within the same constraints as `MAP`. However, updated content must be available even if a `MAP` precedes a `RELOAD` within the same frame. ### External symbol optimizations Only `LOAD` and `RELOAD` should trigger external code side-effects. In an effort to prevent leaks from unnecessary external code executions, the following constraints are assumed: - An explicit `MAP` **must** exist in the scope of any `LOAD`. - All symbols declared in `MAP` **must** be used for all template renderings of a specific node. Any code compiler or checked **should** generate an error on any orphaned `LOAD` or `MAP` symbols as described above. ### Signals Signal may be set when executing of external code symbols, and may be used as a simple exception mechanism. The signal flag arguments should only set a single flag to be tested. If more than one flag is set, the first flag matched will be used as the trigger. First 8 flags are reserved and used for internal VM operations. ### Avoid duplicate menu items The vm execution should overwrite duplicate `MOUT` directives with the last definition between `HALT` instructions. The assembler should detect duplicate `INCMP` and `MOUT` (or menu batch code) selectors, and fail to compile. `MSEP` should be included in duplication detection. ## Menus A menu has both a display and a input processing part. They are on either side of a `HALT` instruction. To assist with menu creation, a few batch operation symbols have been made available for use with the assembly language. * `DOWN ` descend to next frame * `UP ` return to the previous frame * `NEXT ` include pagination advance * `PREVIOUS ` include pagination return. If `NEXT` has not been defined this will not be rendered. ## Rendering The fixed-size output is generated using a templating language, and a combination of one or more _max size_ properties, and an optional _sink_ property that will attempt to consume all remaining capacity of the rendered template. For example, in this example - `maxOutputSize` is 256 bytes long. - `template` is 120 bytes long. - param `one` has max size 10 but uses 5. - param `two` has max size 20 but uses 12. - param `three` is a _sink_. The renderer may use up to `256 - 120 - 5 - 12 = 119` bytes from the _sink_ when rendering the output. ### Menu rendering The menu is appended to the template output. A max size can be set for the menu, which will count towards the space available for the _template sink_. Menus too long for a single screen should be browseable through separate screens. How the browse choice is displayed is defined using the `MSEP` definition. The browse choice counts towards the menu size capacity. When browsing additional menu pages, the template output should not be included. ### Menu defaults Browsing menu display definitions (`MNEXT`, `MPREV`) as well as size constaints (`MSIZE`) should have sane defaults defined by the assembler if they are missing from the assembly code. ### Multipage support Multipage outputs, like listings, are handled using the _sink_ output constraints: - first calculate what the rendered display size is when all symbol results that are _not_ sinks are resolved. - split and cache the list data within its semantic context, given the _sink_ limitation after rendering. - provide a `next` and `previous` menu item to browse the prepared pagination of the list data. ### Languages support Language for rendering is determined at the top-level state. Lookups dependent on language are prefixed by either `ISO 639-1` or `ISO 639-3` language codes, followed by `:`. Default language means records returned without prefix if no language is set. Default language should be settable at the top-level. Node names **must** be defined using 7-bit ASCII. ## Virtual machine interface layout This is the version `0` of the VM. That translates to _highly experimental_. Currently the following rules apply for encoding in version `0`: - A code instruction is a _big-endian_ 2-byte value. See `vm/opcodes.go` for valid opcode values. - `symbol` value is encoded as _one byte_ of string length, after which the byte-value of the string follows. - `size` value is encoded as _one byte_ of numeric length, after which the _big-endian_ byte-value of the integer follows. - `signal` value is encoded as _one byte_ of byte length, after which a byte-array representing the defined signal follows. ## Reference implementation This repository provides a `golang` reference implementation for the `festive` concept. In this reference implementation some constraints apply ### Structure _TODO_: `state` will be separated into `cache` and `session`. - `vm`: Defines instructions, and applies transformations according to the instructions. - `state`: Holds the code cache, contents cache aswell as error tates from code execution. - `resource`: Retrieves data and bytecode from external symbols, and retrieves and renders templates. - `engine`: Outermost interface. Orchestrates execution of bytecode against input. ### Template rendering Template rendering is done using the `text/template` faciilty in the `golang` standard library. It expects all replacement symbols to be available at time of rendering, and has no tolerance for missing ones. ## Bytecode examples (Minimal, WIP) ``` 000a 03666f6f 06746f20666f6f # MOUT "foo" "to foo" - display a menu entry for choice "foo", described by "to foo" 0008 03666f6f 03626172 # INCMP "foo" "bar" - move to node "bar" if input is "FOO" 0001 0461696565 01 01 # CATCH "aiee" 1 1 - move to node "aiee" (and immediately halt) if input match flag (1) is not set (1) 0003 04616263 020104 # LOAD "abc" 260 - execute code symbol "abc" with a result size limit of 260 (2 byte BE integer, 0x0104) 0003 04646566 00 # LOAD "def" 0 - execute code symbol "abc" with no size limit (sink) 0005 04616263 # MAP "abc" - make "abc" available for renderer 0007 # HALT - stop execution (require new input to continue) 0006 03313233 # MOVE "123" - move to node "123" (regardless of input) 0007 # HALT - stop execution ``` ## Development tools Located in the `dev/` directory. ### Test data generation `go run ./dev/testdata/ ` Outputs bytecodes and templates for test data scenarios used in `engine` unit tests. ### Interactive runner `go run ./dev [-d ] [--root ]` Creates a new interactive session using `engine.DefaultEngine`, starting execution at symbol `root_symbol` `data_directory` points to a directory where templates and bytecode is to be found (in the same format as generated by `dev/testdata`). If `data_directory` is not set, current directory will be used. if `root_symbol` is not set, the symbol `root` will be used. ### Disassembler `go run ./dev/testdata/ ` The output from this tool is to be considered debugging output, as the assembly language isn't formalized yet. In the meantime, it will at least list all the instructions, and thus validate the file. ### Assembler **TBD** An assmebly language will be defined to generate the _routing_ and _execution_ bytecodes for each menu node.