openethereum/Cargo.lock

3817 lines
161 KiB
Plaintext
Raw Normal View History

Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
[[package]]
name = "adler32"
version = "1.0.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "advapi32-sys"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "aho-corasick"
version = "0.6.3"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"memchr 1.0.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "ansi_term"
version = "0.9.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-12-13 23:38:29 +01:00
[[package]]
name = "app_dirs"
version = "1.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"ole32-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"shell32-sys 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"xdg 2.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "arrayvec"
2017-11-18 23:14:57 +01:00
version = "0.4.4"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"nodrop 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"odds 0.2.25 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "aster"
version = "0.41.0"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"syntex_syntax 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "atty"
version = "0.2.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "backtrace"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.3.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"backtrace-sys 0.1.14 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"cfg-if 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)",
"dbghelp-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rustc-demangle 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "backtrace-sys"
version = "0.1.14"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"cc 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-02-14 19:30:37 +01:00
[[package]]
name = "base-x"
version = "0.2.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "base32"
version = "0.3.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
[[package]]
name = "base64"
version = "0.6.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"safemem 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "bigint"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "4.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-22 17:05:28 +02:00
"crunchy 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rustc_version 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "bincode"
version = "0.8.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "bit-set"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bit-vec 0.4.4 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "bit-set"
version = "0.4.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bit-vec 0.4.4 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "bit-vec"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.4.4"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "bitflags"
version = "0.7.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "bitflags"
version = "0.8.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "bitflags"
version = "0.9.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
2017-07-29 17:12:07 +02:00
[[package]]
name = "bloomable"
version = "0.1.0"
dependencies = [
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
2017-07-29 17:12:07 +02:00
]
[[package]]
name = "bloomchain"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2017-03-22 02:01:46 +01:00
[[package]]
name = "bn"
2017-03-28 00:42:37 +02:00
version = "0.4.4"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
source = "git+https://github.com/paritytech/bn#c9831a8d10d55045692394cbc10efe0321ddb16f"
2017-03-22 02:01:46 +01:00
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
2017-03-22 02:01:46 +01:00
]
[[package]]
name = "byteorder"
version = "1.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-05-27 13:03:00 +02:00
[[package]]
2016-08-08 17:03:25 +02:00
name = "bytes"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.4.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"iovec 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "cc"
version = "1.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"rayon 0.8.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "cfg-if"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.2"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "chainspec"
version = "0.1.0"
dependencies = [
"ethjson 0.1.0",
"serde_ignored 0.0.4 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-02-14 19:30:37 +01:00
[[package]]
name = "cid"
version = "0.2.2"
2017-02-14 19:30:37 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
2017-02-20 16:42:09 +01:00
"integer-encoding 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
2017-02-14 19:30:37 +01:00
"multibase 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
"multihash 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-02-14 19:30:37 +01:00
]
[[package]]
name = "clap"
version = "2.26.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"ansi_term 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
"atty 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bitflags 0.9.1 (registry+https://github.com/rust-lang/crates.io-index)",
"strsim 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
"term_size 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
"textwrap 0.8.0 (registry+https://github.com/rust-lang/crates.io-index)",
"unicode-width 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)",
"vec_map 0.8.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "coco"
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"either 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"scopeguard 0.3.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "common-types"
version = "0.1.0"
dependencies = [
2017-07-29 17:12:07 +02:00
"bloomable 0.1.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-util 1.9.0",
"ethjson 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"rlp_derive 0.1.0",
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "conv"
version = "0.3.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"custom_derive 0.1.7 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "cookie"
version = "0.3.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
"url 1.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "core-foundation"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"core-foundation-sys 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "core-foundation-sys"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "crossbeam"
version = "0.2.10"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2017-07-18 15:38:10 +02:00
[[package]]
name = "crunchy"
2017-08-22 17:05:28 +02:00
version = "0.1.6"
2017-07-18 15:38:10 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "crypt32-sys"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "ctrlc"
2016-02-23 10:14:56 +01:00
version = "1.1.1"
source = "git+https://github.com/paritytech/rust-ctrlc.git#b523017108bb2d571a7a69bd97bc406e63bc7a9d"
2016-02-14 17:35:45 +01:00
dependencies = [
2016-04-24 19:10:56 +02:00
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "custom_derive"
version = "0.1.7"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-18 12:42:01 +01:00
[[package]]
name = "daemonize"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.3"
2016-02-18 12:42:01 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-18 12:42:01 +01:00
]
[[package]]
name = "dbghelp-sys"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "difference"
version = "1.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "dir"
version = "0.1.0"
dependencies = [
"app_dirs 1.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"ethcore-bigint 0.2.1",
"journaldb 0.1.0",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "docopt"
2017-07-06 11:36:15 +02:00
version = "0.8.1"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"regex 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"strsim 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "dtoa"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.4.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "edit-distance"
version = "2.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "either"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "1.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
[[package]]
name = "elastic-array"
version = "0.9.0"
2017-04-19 15:35:12 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-10-26 13:53:47 +02:00
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-10-26 13:53:47 +02:00
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "env_logger"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.4.3"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"regex 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "error-chain"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.11.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2017-11-17 17:12:12 +01:00
dependencies = [
"backtrace 0.3.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "eth-secp256k1"
2017-11-18 23:14:57 +01:00
version = "0.5.7"
source = "git+https://github.com/paritytech/rust-secp256k1#6370d63adf4e8c91e2eae9225eef4b4e0294c5d0"
2016-02-14 17:35:45 +01:00
dependencies = [
2017-11-18 23:14:57 +01:00
"arrayvec 0.4.4 (registry+https://github.com/rust-lang/crates.io-index)",
"cc 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "ethabi"
version = "4.0.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"error-chain 0.11.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-07 10:06:02 +02:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "ethash"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
2016-02-14 17:35:45 +01:00
dependencies = [
2017-08-22 17:05:28 +02:00
"crunchy 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
"either 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"memmap 0.5.2 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"primal 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "ethcore"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
2016-02-14 17:35:45 +01:00
dependencies = [
2017-09-01 16:57:57 +02:00
"ansi_term 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-29 17:12:07 +02:00
"bloomable 0.1.0",
"bloomchain 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-03-28 00:42:37 +02:00
"bn 0.4.4 (git+https://github.com/paritytech/bn)",
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"common-types 0.1.0",
"crossbeam 0.2.10 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethash 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bloom-journal 0.1.0",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-devtools 1.9.0",
"ethcore-io 1.9.0",
"ethcore-logger 1.9.0",
"ethcore-stratum 1.9.0",
"ethcore-util 1.9.0",
"ethjson 0.1.0",
"ethkey 0.3.0",
"ethstore 0.2.0",
"evm 0.1.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"hardware-wallet 1.9.0",
2017-11-10 18:46:35 +01:00
"hashdb 0.1.1",
2017-09-12 19:23:02 +02:00
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
"hyper 0.10.0-a.0 (git+https://github.com/paritytech/hyper)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"itertools 0.5.10 (registry+https://github.com/rust-lang/crates.io-index)",
"journaldb 0.1.0",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
"kvdb 0.1.0",
"kvdb-memorydb 0.1.0",
"kvdb-rocksdb 0.1.0",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"linked-hash-map 0.5.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"lru-cache 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"macros 0.1.0",
"memory-cache 0.1.0",
2017-11-10 20:15:37 +01:00
"memorydb 0.1.1",
"migration 0.1.0",
"native-contracts 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"num_cpus 1.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
"parity-machine 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"patricia-trie 0.1.0",
"price-info 1.7.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"rayon 0.8.2 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"rlp_derive 0.1.0",
2016-06-15 01:27:47 +02:00
"rust-crypto 0.2.36 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"semantic_version 0.1.0",
"snappy 0.1.0 (git+https://github.com/paritytech/rust-snappy)",
2017-02-17 16:18:31 +01:00
"stats 0.1.0",
2017-07-29 17:12:07 +02:00
"table 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
"transient-hashmap 0.4.0 (registry+https://github.com/rust-lang/crates.io-index)",
"triehash 0.1.0",
"unexpected 0.1.0",
2017-07-29 17:12:07 +02:00
"using_queue 0.1.0",
"util-error 0.1.0",
"vm 0.1.0",
"wasm 0.1.0",
2016-02-14 17:35:45 +01:00
]
2016-09-13 15:26:31 +02:00
[[package]]
name = "ethcore-bigint"
2017-11-06 16:31:15 +01:00
version = "0.2.1"
2016-09-13 15:26:31 +02:00
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bigint 4.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-28 12:40:29 +02:00
"plain_hasher 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-09-13 15:26:31 +02:00
]
[[package]]
name = "ethcore-bigint"
version = "0.2.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"bigint 4.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"plain_hasher 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-09-29 12:19:39 +02:00
[[package]]
name = "ethcore-bloom-journal"
version = "0.1.0"
2016-10-21 11:57:30 +02:00
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"siphasher 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
2016-10-21 11:57:30 +02:00
]
2016-09-29 12:19:39 +02:00
[[package]]
name = "ethcore-bytes"
version = "0.1.0"
2016-02-19 16:09:31 +01:00
[[package]]
name = "ethcore-devtools"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
2016-02-19 16:09:31 +01:00
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-19 16:09:31 +01:00
]
[[package]]
name = "ethcore-io"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
"crossbeam 0.2.10 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mio 0.6.10 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-12-07 13:52:45 +01:00
[[package]]
name = "ethcore-light"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
2017-03-07 17:29:27 +01:00
dependencies = [
"bincode 0.8.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethcore 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-io 1.9.0",
"ethcore-network 1.9.0",
"ethcore-util 1.9.0",
"evm 0.1.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
"itertools 0.5.10 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
"kvdb 0.1.0",
"kvdb-memorydb 0.1.0",
"kvdb-rocksdb 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"memory-cache 0.1.0",
2017-11-10 20:15:37 +01:00
"memorydb 0.1.1",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"patricia-trie 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"rlp_derive 0.1.0",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"smallvec 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
"stats 0.1.0",
2017-11-14 17:47:41 +01:00
"tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
"triehash 0.1.0",
"vm 0.1.0",
2016-12-07 13:52:45 +01:00
]
[[package]]
name = "ethcore-logger"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
"ansi_term 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-18 23:14:57 +01:00
"arrayvec 0.4.4 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"env_logger 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
"isatty 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"regex 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "ethcore-network"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
"ansi_term 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-13 14:37:08 +01:00
"error-chain 0.11.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-devtools 1.9.0",
"ethcore-io 1.9.0",
"ethcore-logger 1.9.0",
"ethcrypto 0.1.0",
"ethkey 0.3.0",
"igd 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"ipnetwork 0.12.7 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mio 0.6.10 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"path 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"rust-crypto 0.2.36 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"snappy 0.1.0 (git+https://github.com/paritytech/rust-snappy)",
"tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-07 10:06:02 +02:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "ethcore-secretstore"
version = "1.0.0"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethcore 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-logger 1.9.0",
"ethcore-util 1.9.0",
"ethcrypto 0.1.0",
"ethkey 0.3.0",
"ethsync 1.9.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"futures-cpupool 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"hyper 0.10.13 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
"kvdb 0.1.0",
"kvdb-rocksdb 0.1.0",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"native-contracts 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-14 17:47:41 +01:00
"tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)",
SecretStore: administrative sessions prototypes (#6605) * generate random channel encryption key on restart * session-level nonces * fixed warning after rebase * session_nonce -> nonce * full_generation_math_session_with_refreshing_shares && full_generation_math_session_with_adding_new_node * add serveral secret shares at once * SecretStore: initial ShareAdd session prototype * SecretStore: ServersSetChange jobs * SecretStore: servers set change session continued * SecretStore: servers set change session continued * SecretStore: servers set change session continued * SecretStore: known_sessions iterator * SecretStore: implemented SessionsQueue * SecretStore: UnknownSessionsJobTransport * SecretStore: node_added_using_servers_set_change almost done * SecretStore: continue adding tests * SecretStore: node_added_using_servers_set_change + node_added_using_share_add * SecretStore: node_added_using_server_set_change_from_this_node * SecretStore: node_moved_using_share_move * SecretStore: node_moved_using_servers_set_change * SecretStore: node_removed_using_share_remove * SecretStore: node_removed_using_servers_set_change * SecretStore: different folders for client && admin sessions * SecretStore: started adding share change consensus (flush) * SecretStore: fixed spurious tests failures * enum JobPartialRequestAction * SecretStore: started adding consensus layer to ShareAdd session * SecretStore: starting external consensus for ShareAdd * SecretStore: started restoring node_added_using_servers_set_change * SecretStore: node_added_using_servers_set_change works with external consensus * SecretStore: node_added_using_server_set_change_from_this_node works with external consensus * removed debug comments/printlns * SecretStore: share move session supports consensus * SecretStore: share remove with external consensus * SecretStore: started adding basic ShareAdd tests * SecretStore: added ShareAdd tests * SecretStore: added ShareAdd session to cluster * SecretStore: added share move && remove sessions to cluster * SecretStore: ShareMove session tests cleanup * SecretStore: ShareRemove session tests cleanup * SecretStore: added check_secret_is_preserved check * SecretStore: added servers set change to cluster * SecretStore: cleaned up ServersSetChange session tests * SecretStore: cleaning + added tests for ShareRemove * SecretStore: cleaning up * SecretStore: propagated admin_public * SecretStore: fixed persistent_key_storage test * SecretStore: upgrade_db_from_1 * SecretStore: fixed ServersSetChange session completion * SecretStore: check polynom1 in ShareAdd sessions (error for pre-v2 shares) * SecretStore: fixing TODOs * SecretStore: fixing TODOs * SecretStore: check share change plan on 'old' slave nodes * SecretStore: fixing TODOs * SecretStore: store all admin sessions in single container to avoid overlaps * SecretStore: do not update nodes set during admin sessions * SecretStore: moved TODOs to appropriate methods * SecretStore: TODOs * SecretStore: added admin_public arg && fixed warnigs * SecretStore: added shares_to_move_reversed to ShareMove session * SecretStore: additional checks during consensus establishing * license * SecretStore: added TODO about starting ServersSetChange session * SecretStore: redundant clones + docs + lsot unimplemented-s * SecretStore: generation_session_completion_signalled_if_failed_on_master * SecretStore: updated obsolete comment * SecretStore: added type alias for current DocumentKeyShare serialization format * SecretStore: fixed typo * SecretStore; fixed warnings for futures 0.1.15 * fixed warning
2017-10-02 15:27:31 +02:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-proto 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-service 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"url 1.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "ethcore-stratum"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"env_logger 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-10-12 23:44:02 +02:00
"ethcore-logger 1.9.0",
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-macros 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-tcp-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "ethcore-util"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
2016-02-14 17:35:45 +01:00
dependencies = [
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-11-10 18:46:35 +01:00
"hashdb 0.1.1",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:15:37 +01:00
"memorydb 0.1.1",
"patricia-trie 0.1.0",
"triehash 0.1.0",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "ethcrypto"
version = "0.1.0"
dependencies = [
2017-11-18 23:14:57 +01:00
"eth-secp256k1 0.5.7 (git+https://github.com/paritytech/rust-secp256k1)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethkey 0.3.0",
"rust-crypto 0.2.36 (registry+https://github.com/rust-lang/crates.io-index)",
"subtle 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-07 10:06:02 +02:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-03-15 18:17:48 +01:00
[[package]]
name = "ethjson"
version = "0.1.0"
dependencies = [
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
2016-03-15 18:17:48 +01:00
]
[[package]]
name = "ethkey"
version = "0.3.0"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"edit-distance 2.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-18 23:14:57 +01:00
"eth-secp256k1 0.5.7 (git+https://github.com/paritytech/rust-secp256k1)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parity-wordlist 1.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"rust-crypto 0.2.36 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-07 10:06:02 +02:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "ethkey-cli"
version = "0.1.0"
dependencies = [
2017-07-06 11:36:15 +02:00
"docopt 0.8.1 (registry+https://github.com/rust-lang/crates.io-index)",
"env_logger 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
"ethkey 0.3.0",
"panic_hook 0.1.0",
"parity-wordlist 1.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"threadpool 1.7.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "ethstore"
version = "0.2.0"
dependencies = [
"dir 0.1.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcrypto 0.1.0",
"ethkey 0.3.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"itertools 0.5.10 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parity-wordlist 1.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"rust-crypto 0.2.36 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"smallvec 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
"tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-07 10:06:02 +02:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "ethstore-cli"
version = "0.1.0"
dependencies = [
"dir 0.1.0",
2017-07-06 11:36:15 +02:00
"docopt 0.8.1 (registry+https://github.com/rust-lang/crates.io-index)",
"ethstore 0.2.0",
"num_cpus 1.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
"panic_hook 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "ethsync"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
2016-02-14 17:35:45 +01:00
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"env_logger 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethcore 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-io 1.9.0",
"ethcore-light 1.9.0",
"ethcore-network 1.9.0",
"ethcore-util 1.9.0",
"ethkey 0.3.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
"ipnetwork 0.12.7 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
"kvdb 0.1.0",
"kvdb-memorydb 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"macros 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"semver 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"smallvec 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
"triehash 0.1.0",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "evm"
version = "0.1.0"
dependencies = [
"bit-set 0.4.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-10-12 23:44:02 +02:00
"ethcore-util 1.9.0",
"evmjit 1.9.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"memory-cache 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"vm 0.1.0",
]
[[package]]
name = "evmbin"
version = "0.1.0"
dependencies = [
2017-07-06 11:36:15 +02:00
"docopt 0.8.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethcore 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-util 1.9.0",
"ethjson 0.1.0",
"evm 0.1.0",
"panic_hook 0.1.0",
2017-10-20 15:40:25 +02:00
"pretty_assertions 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-01 16:41:33 +02:00
"vm 0.1.0",
]
2016-09-26 18:38:54 +02:00
[[package]]
name = "evmjit"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
2016-09-26 18:38:54 +02:00
dependencies = [
2017-08-07 10:06:02 +02:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-09-26 18:38:54 +02:00
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "fdlimit"
2016-12-05 18:15:05 +01:00
version = "0.1.1"
2016-12-05 14:25:03 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "fetch"
version = "0.1.0"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"futures-cpupool 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"reqwest 0.7.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "flate2"
version = "0.2.20"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"miniz-sys 0.1.10 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "fnv"
version = "1.0.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "foreign-types"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "fs2"
version = "0.4.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-11-02 17:14:05 +01:00
[[package]]
name = "futures"
version = "0.1.16"
2016-11-02 17:14:05 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "futures-cpupool"
version = "0.1.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"num_cpus 1.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "gcc"
version = "0.3.54"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-10-06 15:24:47 +02:00
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rayon 0.8.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "getopts"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.15"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
[[package]]
name = "glob"
2016-03-12 12:10:55 +01:00
version = "0.2.11"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "globset"
version = "0.1.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"aho-corasick 0.6.3 (registry+https://github.com/rust-lang/crates.io-index)",
"fnv 1.0.5 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"memchr 1.0.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"regex 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "hamming"
version = "0.1.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "hardware-wallet"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethkey 0.3.0",
"hidapi 0.3.1 (git+https://github.com/paritytech/hidapi-rs)",
"libusb 0.3.0 (git+https://github.com/paritytech/libusb-rs)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"protobuf 1.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"trezor-sys 1.0.0 (git+https://github.com/paritytech/trezor-sys)",
]
[[package]]
name = "hashdb"
2017-11-10 18:46:35 +01:00
version = "0.1.1"
dependencies = [
"elastic-array 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "heapsize"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.4.1"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-23 10:14:56 +01:00
dependencies = [
2016-04-24 19:10:56 +02:00
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-23 10:14:56 +01:00
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "heck"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"unicode-segmentation 1.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "hex"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "hidapi"
version = "0.3.1"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
source = "git+https://github.com/paritytech/hidapi-rs#2e6182139763e31883c24d0c2dac4c28db16245b"
dependencies = [
"gcc 0.3.54 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "httparse"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "1.2.3"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "hyper"
version = "0.10.0-a.0"
source = "git+https://github.com/paritytech/hyper#da10f69a4924cd44e98a8d1f9562bd7534d13dcc"
dependencies = [
"cookie 0.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"httparse 1.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
"language-tags 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mime 0.2.6 (registry+https://github.com/rust-lang/crates.io-index)",
"rotor 0.6.3 (git+https://github.com/tailhook/rotor)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
"spmc 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
"unicase 1.4.2 (registry+https://github.com/rust-lang/crates.io-index)",
"url 1.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
"vecio 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "hyper"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.10.13"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"base64 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
"httparse 1.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
"language-tags 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mime 0.2.6 (registry+https://github.com/rust-lang/crates.io-index)",
"num_cpus 1.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
"traitobject 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"typeable 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"unicase 1.4.2 (registry+https://github.com/rust-lang/crates.io-index)",
"url 1.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "hyper"
version = "0.11.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"base64 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"futures-cpupool 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
"httparse 1.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
"language-tags 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mime 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)",
"percent-encoding 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-proto 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-service 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"unicase 2.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "hyper-tls"
version = "0.1.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"hyper 0.11.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"native-tls 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-service 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-tls 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-04-24 19:10:56 +02:00
[[package]]
name = "idna"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.4"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"matches 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
"unicode-bidi 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)",
"unicode-normalization 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "igd"
version = "0.6.0"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"hyper 0.10.13 (registry+https://github.com/rust-lang/crates.io-index)",
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"regex 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"xml-rs 0.3.6 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
"xmltree 0.3.2 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
2017-02-20 16:42:09 +01:00
[[package]]
name = "integer-encoding"
version = "1.0.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "interleaved-ordered"
2017-11-14 12:59:01 +01:00
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "iovec"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "ipnetwork"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.12.7"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "isatty"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "itertools"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.5.10"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"either 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "itoa"
version = "0.3.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "journaldb"
version = "0.1.0"
dependencies = [
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-17 10:40:45 +02:00
"ethcore-logger 1.9.0",
2017-11-10 18:46:35 +01:00
"hashdb 0.1.1",
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
"kvdb 0.1.0",
2017-10-17 10:40:45 +02:00
"kvdb-memorydb 0.1.0",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:15:37 +01:00
"memorydb 0.1.1",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"util-error 0.1.0",
]
[[package]]
name = "jsonrpc-core"
version = "8.0.0"
2017-11-13 22:52:25 +01:00
source = "git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9#8f921ed65cda3fba0ce55d31ed62c7f0c3b32966"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "jsonrpc-http-server"
version = "8.0.0"
2017-11-13 22:52:25 +01:00
source = "git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9#8f921ed65cda3fba0ce55d31ed62c7f0c3b32966"
dependencies = [
"hyper 0.11.2 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-server-utils 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"net2 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"unicase 2.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "jsonrpc-ipc-server"
version = "8.0.0"
2017-11-13 22:52:25 +01:00
source = "git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9#8f921ed65cda3fba0ce55d31ed62c7f0c3b32966"
2016-05-06 12:58:37 +02:00
dependencies = [
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-server-utils 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parity-tokio-ipc 0.1.5 (git+https://github.com/nikvolf/parity-tokio-ipc)",
"tokio-service 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-05-06 12:58:37 +02:00
]
2016-12-13 14:27:27 +01:00
[[package]]
name = "jsonrpc-macros"
version = "8.0.0"
2017-11-13 22:52:25 +01:00
source = "git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9#8f921ed65cda3fba0ce55d31ed62c7f0c3b32966"
2016-12-13 14:27:27 +01:00
dependencies = [
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-pubsub 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 14:27:27 +01:00
]
[[package]]
name = "jsonrpc-pubsub"
version = "8.0.0"
2017-11-13 22:52:25 +01:00
source = "git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9#8f921ed65cda3fba0ce55d31ed62c7f0c3b32966"
dependencies = [
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "jsonrpc-server-utils"
version = "8.0.0"
2017-11-13 22:52:25 +01:00
source = "git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9#8f921ed65cda3fba0ce55d31ed62c7f0c3b32966"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"globset 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "jsonrpc-tcp-server"
version = "8.0.0"
2017-11-13 22:52:25 +01:00
source = "git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9#8f921ed65cda3fba0ce55d31ed62c7f0c3b32966"
dependencies = [
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-server-utils 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-service 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "jsonrpc-ws-server"
version = "8.0.0"
2017-11-13 22:52:25 +01:00
source = "git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9#8f921ed65cda3fba0ce55d31ed62c7f0c3b32966"
dependencies = [
2017-11-13 22:52:25 +01:00
"error-chain 0.11.0 (registry+https://github.com/rust-lang/crates.io-index)",
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-server-utils 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"ws 0.7.1 (git+https://github.com/tomusdrw/ws-rs)",
]
2017-11-10 19:04:55 +01:00
[[package]]
name = "keccak-hash"
version = "0.1.0"
dependencies = [
"cc 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"ethcore-bigint 0.2.1",
"tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)",
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "kernel32-sys"
2016-04-24 19:10:56 +02:00
version = "0.2.2"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
"winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "kvdb"
version = "0.1.0"
dependencies = [
"elastic-array 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
"error-chain 0.11.0 (registry+https://github.com/rust-lang/crates.io-index)",
"ethcore-bytes 0.1.0",
]
[[package]]
name = "kvdb-memorydb"
version = "0.1.0"
dependencies = [
"kvdb 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
]
[[package]]
name = "kvdb-rocksdb"
version = "0.1.0"
dependencies = [
"elastic-array 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-11-14 12:59:01 +01:00
"interleaved-ordered 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"kvdb 0.1.0",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"num_cpus 1.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"regex 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"rocksdb 0.4.5 (git+https://github.com/paritytech/rust-rocksdb)",
"tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "language-tags"
version = "0.2.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "lazy_static"
version = "0.2.8"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-10-30 09:56:34 +01:00
[[package]]
name = "lazycell"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.5.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
[[package]]
name = "libc"
version = "0.2.31"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2017-07-06 11:36:15 +02:00
[[package]]
name = "libflate"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.11"
2017-07-06 11:36:15 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"adler32 1.0.2 (registry+https://github.com/rust-lang/crates.io-index)",
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
]
[[package]]
name = "libusb"
version = "0.3.0"
source = "git+https://github.com/paritytech/libusb-rs#47c3d09cab346d629328d4bd691ed3509ffb8cbb"
dependencies = [
"bit-set 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"libusb-sys 0.2.3 (git+https://github.com/paritytech/libusb-sys)",
]
[[package]]
name = "libusb-sys"
version = "0.2.3"
source = "git+https://github.com/paritytech/libusb-sys#c10b1180646c9dc3f23a9b6bb825abcd3b7487ce"
dependencies = [
"gcc 0.3.54 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "linked-hash-map"
version = "0.4.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "linked-hash-map"
version = "0.5.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "local-encoding"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"skeptic 0.4.0 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "log"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.3.8"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "lru-cache"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"linked-hash-map 0.4.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "macros"
version = "0.1.0"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
[[package]]
name = "magenta"
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"conv 0.3.3 (registry+https://github.com/rust-lang/crates.io-index)",
"magenta-sys 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "magenta-sys"
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bitflags 0.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "matches"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.6"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "memchr"
version = "1.0.1"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "memmap"
version = "0.5.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"fs2 0.4.2 (registry+https://github.com/rust-lang/crates.io-index)",
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "memory-cache"
version = "0.1.0"
dependencies = [
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
"lru-cache 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "memorydb"
2017-11-10 20:15:37 +01:00
version = "0.1.1"
dependencies = [
2017-09-12 19:23:02 +02:00
"bigint 4.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"elastic-array 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-11-10 18:46:35 +01:00
"hashdb 0.1.1",
2017-09-12 19:23:02 +02:00
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
]
[[package]]
name = "migration"
version = "0.1.0"
dependencies = [
"error-chain 0.11.0 (registry+https://github.com/rust-lang/crates.io-index)",
"kvdb 0.1.0",
"kvdb-rocksdb 0.1.0",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"macros 0.1.0",
"tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "mime"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "mime"
version = "0.3.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"unicase 2.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "mime_guess"
version = "2.0.0-alpha.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"mime 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)",
"phf 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)",
"phf_codegen 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)",
"unicase 1.4.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "miniz-sys"
version = "0.1.10"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"cc 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "mio"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.6.10"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-08-08 17:03:25 +02:00
dependencies = [
Fixing secretstore TODOs - part 1 (#5386) * ECDKG protocol prototype * added test for enc/dec math * get rid of decryption_session * added licenses * fix after merge * get rid of unused serde dependency * doc * decryption session [without commutative enc] * failed_dec_session * fixed tests * added commen * added more decryption session tests * helper to localize an issue * more computations to localize error * decryption_session::SessionParams * added tests for EC math to localize problem * secretstore network transport * encryption_session_works_over_network * network errors processing * connecting to KeyServer * licenses * get rid of debug println-s * fixed secretstore args * encryption results are stored in KS database * decryption protocol works over network * enc/dec Session traits * fixing warnings * fix after merge * on-chain ACL checker proto * fixed compilation * fixed compilation * finally fixed <odd>-of-N-scheme * temporary commented test * 1-of-N works in math * scheme 1-of-N works * updated AclStorage with real contract ABI * remove unnecessary unsafety * fixed grumbles * wakeup on access denied * encrypt secretstore messages * 'shadow' decryption * fix grumbles * lost files * secretstore cli-options * decryption seccion when ACL check failed on master * disallow regenerating key for existing document * removed obsolete TODO * fix after merge * switched to tokio_io * fix after merge * fix after merge * fix after merge * fix after merge * fix after merge * fixed test * fix after merge
2017-04-08 11:26:16 +02:00
"iovec 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-08-08 17:03:25 +02:00
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"lazycell 0.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"magenta 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"magenta-sys 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
Fixing secretstore TODOs - part 1 (#5386) * ECDKG protocol prototype * added test for enc/dec math * get rid of decryption_session * added licenses * fix after merge * get rid of unused serde dependency * doc * decryption session [without commutative enc] * failed_dec_session * fixed tests * added commen * added more decryption session tests * helper to localize an issue * more computations to localize error * decryption_session::SessionParams * added tests for EC math to localize problem * secretstore network transport * encryption_session_works_over_network * network errors processing * connecting to KeyServer * licenses * get rid of debug println-s * fixed secretstore args * encryption results are stored in KS database * decryption protocol works over network * enc/dec Session traits * fixing warnings * fix after merge * on-chain ACL checker proto * fixed compilation * fixed compilation * finally fixed <odd>-of-N-scheme * temporary commented test * 1-of-N works in math * scheme 1-of-N works * updated AclStorage with real contract ABI * remove unnecessary unsafety * fixed grumbles * wakeup on access denied * encrypt secretstore messages * 'shadow' decryption * fix grumbles * lost files * secretstore cli-options * decryption seccion when ACL check failed on master * disallow regenerating key for existing document * removed obsolete TODO * fix after merge * switched to tokio_io * fix after merge * fix after merge * fix after merge * fix after merge * fix after merge * fixed test * fix after merge
2017-04-08 11:26:16 +02:00
"miow 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"net2 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-08-08 17:03:25 +02:00
]
2016-10-30 09:56:34 +01:00
[[package]]
name = "mio-named-pipes"
version = "0.1.4"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
source = "git+https://github.com/alexcrichton/mio-named-pipes#9c1bbb985b74374d3b7eda76937279f8e977ef81"
2016-10-30 09:56:34 +01:00
dependencies = [
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mio 0.6.10 (registry+https://github.com/rust-lang/crates.io-index)",
"miow 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-10-30 09:56:34 +01:00
]
[[package]]
name = "mio-uds"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.6.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"mio 0.6.10 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "miow"
version = "0.2.1"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
2016-04-24 19:10:56 +02:00
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"net2 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
"ws2_32-sys 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "msdos_time"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-02-14 19:30:37 +01:00
[[package]]
name = "multibase"
version = "0.6.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"base-x 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "multihash"
version = "0.6.0"
2017-02-14 19:30:37 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"ring 0.9.7 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-07 10:06:02 +02:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-02-14 19:30:37 +01:00
]
[[package]]
name = "native-contract-generator"
version = "0.1.0"
dependencies = [
"ethabi 4.0.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"heck 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "native-contracts"
version = "0.1.0"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"ethabi 4.0.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"native-contract-generator 0.1.0",
]
[[package]]
name = "native-tls"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"openssl 0.9.19 (registry+https://github.com/rust-lang/crates.io-index)",
"schannel 0.1.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"security-framework 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"security-framework-sys 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "net2"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.31"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"cfg-if 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
"ws2_32-sys 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-08-29 14:38:01 +02:00
[[package]]
name = "node-filter"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
2017-08-29 14:38:01 +02:00
dependencies = [
2017-10-12 23:44:02 +02:00
"ethcore 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-io 1.9.0",
"ethcore-network 1.9.0",
"ethcore-util 1.9.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"kvdb-memorydb 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-29 14:38:01 +02:00
"native-contracts 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-29 14:38:01 +02:00
]
[[package]]
name = "node-health"
version = "0.1.0"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"futures-cpupool 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-24 12:12:15 +02:00
"ntp 0.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
"parity-reactor 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "nodrop"
version = "0.1.9"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"odds 0.2.25 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "ntp"
2017-10-24 12:12:15 +02:00
version = "0.3.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
2017-10-24 12:12:15 +02:00
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"conv 0.3.3 (registry+https://github.com/rust-lang/crates.io-index)",
"custom_derive 0.1.7 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-24 12:12:15 +02:00
"error-chain 0.11.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "num"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.40"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-bigint 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"num-complex 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"num-integer 0.1.35 (registry+https://github.com/rust-lang/crates.io-index)",
"num-iter 0.1.34 (registry+https://github.com/rust-lang/crates.io-index)",
"num-rational 0.1.39 (registry+https://github.com/rust-lang/crates.io-index)",
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
]
[[package]]
name = "num-bigint"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.40"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-integer 0.1.35 (registry+https://github.com/rust-lang/crates.io-index)",
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
2016-04-24 19:10:56 +02:00
[[package]]
name = "num-complex"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.40"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
]
[[package]]
name = "num-integer"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.35"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
]
[[package]]
name = "num-iter"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.34"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-integer 0.1.35 (registry+https://github.com/rust-lang/crates.io-index)",
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
]
[[package]]
name = "num-rational"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.39"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-bigint 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"num-integer 0.1.35 (registry+https://github.com/rust-lang/crates.io-index)",
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
]
[[package]]
name = "num-traits"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.40"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "num_cpus"
version = "1.7.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-25 14:09:39 +01:00
[[package]]
name = "number_prefix"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.7"
2016-02-25 14:09:39 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-25 14:09:39 +01:00
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "odds"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.25"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-12-13 23:38:29 +01:00
[[package]]
name = "ole32-sys"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "openssl"
version = "0.9.19"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"bitflags 0.9.1 (registry+https://github.com/rust-lang/crates.io-index)",
"foreign-types 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"openssl-sys 0.9.19 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "openssl-sys"
version = "0.9.19"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"cc 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"pkg-config 0.3.9 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"vcpkg 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "order-stat"
version = "0.1.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "ordered-float"
version = "0.5.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"unreachable 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "owning_ref"
version = "0.3.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"stable_deref_trait 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "panic_hook"
version = "0.1.0"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"backtrace 0.3.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity"
2017-10-17 16:48:38 +02:00
version = "1.9.0"
dependencies = [
"ansi_term 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
"app_dirs 1.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"clap 2.26.2 (registry+https://github.com/rust-lang/crates.io-index)",
"ctrlc 1.1.1 (git+https://github.com/paritytech/rust-ctrlc.git)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"daemonize 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
"dir 0.1.0",
2017-07-06 11:36:15 +02:00
"docopt 0.8.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"env_logger 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethcore 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-devtools 1.9.0",
"ethcore-io 1.9.0",
"ethcore-light 1.9.0",
"ethcore-logger 1.9.0",
"ethcore-network 1.9.0",
"ethcore-secretstore 1.0.0",
2017-10-12 23:44:02 +02:00
"ethcore-stratum 1.9.0",
"ethcore-util 1.9.0",
"ethkey 0.3.0",
2017-10-12 23:44:02 +02:00
"ethsync 1.9.0",
"fdlimit 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"futures-cpupool 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"ipnetwork 0.12.7 (registry+https://github.com/rust-lang/crates.io-index)",
"isatty 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
"journaldb 0.1.0",
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
"kvdb 0.1.0",
"kvdb-rocksdb 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"migration 0.1.0",
2017-10-12 23:44:02 +02:00
"node-filter 1.9.0",
"node-health 0.1.0",
"num_cpus 1.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"number_prefix 0.2.7 (registry+https://github.com/rust-lang/crates.io-index)",
"panic_hook 0.1.0",
2017-10-12 23:44:02 +02:00
"parity-dapps 1.9.0",
"parity-hash-fetch 1.9.0",
"parity-ipfs-api 1.9.0",
"parity-local-store 0.1.0",
"parity-reactor 0.1.0",
2017-10-12 23:44:02 +02:00
"parity-rpc 1.9.0",
"parity-rpc-client 1.4.0",
2017-10-12 23:44:02 +02:00
"parity-updater 1.9.0",
2017-12-27 11:32:05 +01:00
"parity-version 1.9.0",
"parity-whisper 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"path 0.1.0",
"pretty_assertions 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"regex 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"rpassword 1.0.2 (registry+https://github.com/rust-lang/crates.io-index)",
"rpc-cli 1.4.0",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rustc_version 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
"semver 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
"toml 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"ws2_32-sys 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-dapps"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
"base32 0.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"env_logger 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-devtools 1.9.0",
"ethcore-util 1.9.0",
"fetch 0.1.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"futures-cpupool 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"itertools 0.5.10 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-http-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
"linked-hash-map 0.5.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mime_guess 2.0.0-alpha.2 (registry+https://github.com/rust-lang/crates.io-index)",
"node-health 0.1.0",
2017-11-10 10:58:56 +01:00
"parity-dapps-glue 1.9.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"parity-hash-fetch 1.9.0",
"parity-reactor 0.1.0",
2017-10-12 23:44:02 +02:00
"parity-ui 1.9.0",
2017-12-27 11:32:05 +01:00
"parity-version 1.9.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"unicase 1.4.2 (registry+https://github.com/rust-lang/crates.io-index)",
"zip 0.1.19 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-dapps-glue"
2017-11-10 10:58:56 +01:00
version = "1.9.1"
dependencies = [
"aster 0.41.0 (registry+https://github.com/rust-lang/crates.io-index)",
"glob 0.2.11 (registry+https://github.com/rust-lang/crates.io-index)",
"mime_guess 2.0.0-alpha.2 (registry+https://github.com/rust-lang/crates.io-index)",
"quasi 0.32.0 (registry+https://github.com/rust-lang/crates.io-index)",
"quasi_codegen 0.32.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-09-05 11:21:18 +02:00
"quasi_macros 0.32.0 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex_syntax 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-dapps-glue"
2017-11-10 10:18:20 +01:00
version = "1.9.1"
2017-09-05 11:21:18 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"aster 0.41.0 (registry+https://github.com/rust-lang/crates.io-index)",
"glob 0.2.11 (registry+https://github.com/rust-lang/crates.io-index)",
"mime_guess 2.0.0-alpha.2 (registry+https://github.com/rust-lang/crates.io-index)",
"quasi 0.32.0 (registry+https://github.com/rust-lang/crates.io-index)",
"quasi_codegen 0.32.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"syntex 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex_syntax 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-07-08 13:35:25 +02:00
]
[[package]]
name = "parity-hash-fetch"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
"ethabi 4.0.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-util 1.9.0",
"fetch 0.1.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mime 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)",
"mime_guess 2.0.0-alpha.2 (registry+https://github.com/rust-lang/crates.io-index)",
"native-contracts 0.1.0",
"parity-reactor 0.1.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-15 18:24:18 +01:00
]
2017-02-14 19:30:37 +01:00
[[package]]
name = "parity-ipfs-api"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
2017-02-14 19:30:37 +01:00
dependencies = [
"cid 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethcore 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-http-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"multihash 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"unicase 2.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-02-14 19:30:37 +01:00
]
[[package]]
name = "parity-local-store"
version = "0.1.0"
dependencies = [
2017-10-12 23:44:02 +02:00
"ethcore 1.9.0",
"ethcore-io 1.9.0",
"ethkey 0.3.0",
"kvdb 0.1.0",
"kvdb-memorydb 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-machine"
version = "0.1.0"
dependencies = [
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-10-12 23:44:02 +02:00
"ethcore-util 1.9.0",
]
[[package]]
name = "parity-reactor"
version = "0.1.0"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-rpc"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
2017-09-01 16:57:57 +02:00
"ansi_term 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
"cid 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethash 1.9.0",
"ethcore 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-devtools 1.9.0",
"ethcore-io 1.9.0",
"ethcore-light 1.9.0",
"ethcore-logger 1.9.0",
"ethcore-network 1.9.0",
"ethcore-util 1.9.0",
"ethcrypto 0.1.0",
"ethjson 0.1.0",
"ethkey 0.3.0",
"ethstore 0.2.0",
2017-10-12 23:44:02 +02:00
"ethsync 1.9.0",
"fetch 0.1.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"futures-cpupool 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"hardware-wallet 1.9.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"itertools 0.5.10 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-http-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-ipc-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-macros 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-pubsub 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-ws-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
2017-11-17 17:12:12 +01:00
"keccak-hash 0.1.0",
"kvdb-memorydb 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"macros 0.1.0",
"multihash 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
"node-health 0.1.0",
"order-stat 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
"parity-reactor 0.1.0",
2017-10-12 23:44:02 +02:00
"parity-updater 1.9.0",
2017-12-27 11:32:05 +01:00
"parity-version 1.9.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"pretty_assertions 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"rust-crypto 0.2.36 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"semver 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"stats 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
SecretStore: servers set change session api (#6925) * SecretStore: first key versions flush * SecretStore: key versions in encryption session * SecretStore: flush key versions negotiation session * SecretStore: connected key version negotiation session to cluster * SecretStore: cluster sessions container refactoring * SecretStore: flush * SecretStore: flush key versions * SecretStore: flush * SecretStore: delegation proto * SecretStore: decryption_session_is_delegated_when_node_does_not_have_key_share * SecretStore: fixed version in decryption session * SecretStore: signing_session_is_delegated_when_node_does_not_have_key_share * SecretStore: started restoring admin sessions * SecretStore: restoring admin sessions * SecretStore: removed obsolete ShareRemove && ShareMove sessions * SecretStore: ShareAdd math tests only require old_t+1 nodes * SecretStore: ShareAdd revamp using new math backend * SecretStore: do not include isolated nodes into consensus_group * SecretStore: ServersSetChange + ShareAdd revamp * removed debug printlns * SecretStore: key version negotiation tests * SecretStore: removed debug/merge artifacts * SecretStore: fixed master node selection * SecretStore: cleanup + tests + fixes * SecretStore: uncommented tests * SecretStore: cleaning up * SecretStore: cleaning up + tests * SecretStore: cleaning up * SecretStore: cleaning up && tests * SecretStore: fixing TODOs * SecretStore: fixing TODOs + cleanup * SecretStore: fixing TODOs * SecretStore: nodes_add_to_the_node_with_obsolete_version * SecretStore: nodes_add_fails_when_not_enough_share_owners_are_connected * SecretStore: tests * SecretStore: signing && delegation tests * SecretStore: signing && decryption tests when some nodes are isolated * SecretStore: sessions_are_removed_when_initialization_fails * SecretStore: ceaning up * SecretStore: removed obsolete comments * SecretStore: signing_session_completes_if_node_does_not_have_a_share * SecretStore: initial ServersSetChange API * SecretStore: added secretstore_signServersSet RPC * SecretStore: ChangeServersSet parse tests * SecretStore: fixes after manual ServersSetChange tests * lost file * fixed network ports overlap in tests * lost files
2017-11-16 17:34:23 +01:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"tokio-timer 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)",
"transient-hashmap 0.4.0 (registry+https://github.com/rust-lang/crates.io-index)",
"vm 0.1.0",
]
2016-11-02 17:14:05 +01:00
[[package]]
name = "parity-rpc-client"
version = "1.4.0"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-ws-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"matches 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"parity-rpc 1.9.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"url 1.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-tokio-ipc"
version = "0.1.5"
source = "git+https://github.com/nikvolf/parity-tokio-ipc#d6c5b3cfcc913a1b9cf0f0562a10b083ceb9fb7c"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mio-named-pipes 0.1.4 (git+https://github.com/alexcrichton/mio-named-pipes)",
"miow 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-named-pipes 0.1.0 (git+https://github.com/nikvolf/tokio-named-pipes)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"tokio-uds 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)",
2016-11-02 17:14:05 +01:00
]
[[package]]
name = "parity-ui"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
2017-10-12 23:44:02 +02:00
"parity-ui-dev 1.9.0",
2017-09-05 11:21:18 +02:00
"parity-ui-old-dev 1.9.0",
"parity-ui-old-precompiled 1.9.0 (git+https://github.com/js-dist-paritytech/parity-master-1-9-v1.git)",
"parity-ui-precompiled 1.9.0 (git+https://github.com/js-dist-paritytech/parity-master-1-9-shell.git)",
"rustc_version 0.1.7 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-ui-dev"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
2017-11-10 10:58:56 +01:00
"parity-dapps-glue 1.9.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-09-05 11:21:18 +02:00
]
[[package]]
name = "parity-ui-old-dev"
version = "1.9.0"
dependencies = [
2017-11-10 10:58:56 +01:00
"parity-dapps-glue 1.9.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-10-17 18:07:21 +02:00
[[package]]
name = "parity-ui-old-precompiled"
version = "1.9.0"
source = "git+https://github.com/js-dist-paritytech/parity-master-1-9-v1.git#e21325fa6f482192612f7f66ea8a632b9980d1e3"
2017-10-17 18:07:21 +02:00
dependencies = [
2017-11-10 10:58:56 +01:00
"parity-dapps-glue 1.9.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-17 18:07:21 +02:00
]
[[package]]
name = "parity-ui-precompiled"
version = "1.9.0"
source = "git+https://github.com/js-dist-paritytech/parity-master-1-9-shell.git#a42e9967fa9916f886f2e9e17d9fb7791c1d3d4c"
dependencies = [
2017-11-10 10:58:56 +01:00
"parity-dapps-glue 1.9.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-updater"
2017-10-12 23:44:02 +02:00
version = "1.9.0"
dependencies = [
"ethabi 4.0.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethcore 1.9.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-util 1.9.0",
"ethsync 1.9.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"parity-hash-fetch 1.9.0",
"parity-reactor 0.1.0",
2017-12-27 11:32:05 +01:00
"parity-version 1.9.0",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
"path 0.1.0",
2017-10-16 17:28:59 +02:00
"semver 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
"target_info 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-version"
2017-12-27 11:32:05 +01:00
version = "1.9.0"
dependencies = [
"ethcore-bytes 0.1.0",
"rlp 0.2.1",
"rustc_version 0.1.7 (registry+https://github.com/rust-lang/crates.io-index)",
"target_info 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"vergen 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-wasm"
2017-11-12 22:21:15 +01:00
version = "0.15.3"
2017-07-11 11:06:35 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parity-whisper"
version = "0.1.0"
dependencies = [
"bitflags 0.9.1 (registry+https://github.com/rust-lang/crates.io-index)",
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-10-12 23:44:02 +02:00
"ethcore-network 1.9.0",
"ethcrypto 0.1.0",
"ethkey 0.3.0",
"hex 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-13 22:52:25 +01:00
"jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-macros 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
"jsonrpc-pubsub 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"ordered-float 0.5.0 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"ring 0.9.7 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"smallvec 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-07 10:06:02 +02:00
"tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-04-01 08:26:44 +02:00
[[package]]
name = "parity-wordlist"
version = "1.2.0"
2017-04-01 08:26:44 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"itertools 0.5.10 (registry+https://github.com/rust-lang/crates.io-index)",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-04-01 08:26:44 +02:00
]
[[package]]
name = "parking_lot"
version = "0.4.8"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"owning_ref 0.3.3 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"parking_lot_core 0.2.6 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "parking_lot_core"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"smallvec 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "path"
version = "0.1.0"
2017-09-12 19:23:02 +02:00
[[package]]
name = "patricia-trie"
2017-09-12 19:23:02 +02:00
version = "0.1.0"
dependencies = [
"elastic-array 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-09-12 19:23:02 +02:00
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-logger 1.9.0",
2017-11-10 18:46:35 +01:00
"hashdb 0.1.1",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
2017-09-12 19:23:02 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:15:37 +01:00
"memorydb 0.1.1",
2017-09-12 19:23:02 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
2017-09-12 19:23:02 +02:00
"triehash 0.1.0",
]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
[[package]]
name = "percent-encoding"
version = "1.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-04-07 12:10:26 +02:00
[[package]]
name = "phf"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.7.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"phf_shared 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "phf_codegen"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.7.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"phf_generator 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)",
"phf_shared 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "phf_generator"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.7.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"phf_shared 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)",
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "phf_shared"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.7.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"siphasher 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"unicase 1.4.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-04-07 12:10:26 +02:00
[[package]]
name = "pkg-config"
version = "0.3.9"
source = "registry+https://github.com/rust-lang/crates.io-index"
2017-08-17 20:40:10 +02:00
[[package]]
name = "plain_hasher"
version = "0.1.0"
dependencies = [
2017-08-28 12:40:29 +02:00
"crunchy 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
2017-08-17 20:40:10 +02:00
]
[[package]]
name = "plain_hasher"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"crunchy 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "podio"
version = "0.1.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "pretty_assertions"
version = "0.1.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"difference 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "price-info"
version = "1.7.0"
dependencies = [
"fetch 0.1.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "primal"
version = "0.2.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"primal-check 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"primal-estimate 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"primal-sieve 0.2.7 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "primal-bit"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"hamming 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "primal-check"
version = "0.2.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "primal-estimate"
version = "0.2.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "primal-sieve"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.7"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"hamming 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"primal-bit 0.2.4 (registry+https://github.com/rust-lang/crates.io-index)",
"primal-estimate 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"smallvec 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
[[package]]
name = "protobuf"
version = "1.4.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "pulldown-cmark"
version = "0.0.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"getopts 0.2.15 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-11-25 21:27:58 +01:00
[[package]]
name = "pwasm-run-test"
version = "0.1.0"
dependencies = [
"clap 2.26.2 (registry+https://github.com/rust-lang/crates.io-index)",
"ethcore-bigint 0.2.1",
"ethcore-logger 1.9.0",
"ethjson 0.1.0",
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"vm 0.1.0",
"wasm 0.1.0",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "quasi"
version = "0.32.0"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"syntex_errors 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex_syntax 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "quasi_codegen"
version = "0.32.0"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"aster 0.41.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"syntex 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex_errors 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex_syntax 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "quasi_macros"
version = "0.32.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"quasi_codegen 0.32.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-04-07 14:24:52 +02:00
[[package]]
name = "quick-error"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "1.2.1"
2016-04-07 14:24:52 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "quote"
version = "0.3.15"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
[[package]]
name = "rand"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.3.16"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"magenta 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "rayon"
version = "0.7.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"rayon-core 1.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "rayon"
version = "0.8.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"rayon-core 1.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "rayon-core"
version = "1.2.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"coco 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"num_cpus 1.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
[[package]]
name = "redox_syscall"
version = "0.1.31"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
[[package]]
name = "regex"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.2"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"aho-corasick 0.6.3 (registry+https://github.com/rust-lang/crates.io-index)",
"memchr 1.0.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"regex-syntax 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
"thread_local 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)",
"utf8-ranges 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "regex-syntax"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.4.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "reqwest"
version = "0.7.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"hyper 0.11.2 (registry+https://github.com/rust-lang/crates.io-index)",
"hyper-tls 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"libflate 0.1.11 (registry+https://github.com/rust-lang/crates.io-index)",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"native-tls 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"serde_urlencoded 0.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-tls 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"url 1.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-02-14 19:30:37 +01:00
[[package]]
name = "ring"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.9.7"
2017-02-14 19:30:37 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"gcc 0.3.54 (registry+https://github.com/rust-lang/crates.io-index)",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"rayon 0.7.1 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"untrusted 0.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-02-14 19:30:37 +01:00
]
[[package]]
name = "rlp"
2017-11-10 20:21:24 +01:00
version = "0.2.1"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"elastic-array 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-07-06 11:36:15 +02:00
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "rlp_derive"
version = "0.1.0"
dependencies = [
"quote 0.3.15 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"syn 0.11.11 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "rocksdb"
2016-05-30 15:38:23 +02:00
version = "0.4.5"
source = "git+https://github.com/paritytech/rust-rocksdb#166e14ed63cbd2e44b51267b8b98e4b89b0f236f"
2016-02-14 17:35:45 +01:00
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"local-encoding 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"rocksdb-sys 0.3.0 (git+https://github.com/paritytech/rust-rocksdb)",
2016-05-30 15:38:23 +02:00
]
[[package]]
name = "rocksdb-sys"
version = "0.3.0"
source = "git+https://github.com/paritytech/rust-rocksdb#166e14ed63cbd2e44b51267b8b98e4b89b0f236f"
2016-02-14 17:35:45 +01:00
dependencies = [
"cc 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"snappy-sys 0.1.0 (git+https://github.com/paritytech/rust-snappy)",
2016-02-14 17:35:45 +01:00
]
2016-04-07 14:24:52 +02:00
[[package]]
name = "rotor"
version = "0.6.3"
source = "git+https://github.com/tailhook/rotor#80ce2e4cd82fdc7f88bb2d737407fa5106799790"
2016-04-07 14:24:52 +02:00
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mio 0.6.10 (registry+https://github.com/rust-lang/crates.io-index)",
"quick-error 1.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
"void 1.0.2 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-07 14:24:52 +02:00
]
2016-03-09 14:11:15 +01:00
[[package]]
name = "rpassword"
version = "1.0.2"
2016-11-02 17:14:05 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"rprompt 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-11-02 17:14:05 +01:00
]
[[package]]
name = "rpc-cli"
version = "1.4.0"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bigint 4.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"ethcore-util 1.9.0",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
2017-10-12 23:44:02 +02:00
"parity-rpc 1.9.0",
2016-11-02 17:14:05 +01:00
"parity-rpc-client 1.4.0",
"rpassword 1.0.2 (registry+https://github.com/rust-lang/crates.io-index)",
2016-11-02 17:14:05 +01:00
]
[[package]]
name = "rprompt"
version = "1.0.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
[[package]]
name = "rust-crypto"
2016-06-15 01:27:47 +02:00
version = "0.2.36"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"gcc 0.3.54 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "rustc-demangle"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
2017-07-06 11:36:15 +02:00
[[package]]
name = "rustc-hex"
version = "1.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
[[package]]
name = "rustc-serialize"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.3.24"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "rustc_version"
2016-02-18 23:29:41 +01:00
version = "0.1.7"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"semver 0.1.20 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "rustc_version"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"semver 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
[[package]]
name = "safemem"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "schannel"
version = "0.1.8"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"advapi32-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"crypt32-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"secur32-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "scoped-tls"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "scopeguard"
version = "0.3.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "secur32-sys"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "security-framework"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.16"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"core-foundation 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
"core-foundation-sys 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"security-framework-sys 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "security-framework-sys"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.16"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"core-foundation-sys 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "semantic_version"
version = "0.1.0"
2016-02-14 17:35:45 +01:00
[[package]]
name = "semver"
version = "0.1.20"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "semver"
version = "0.6.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"semver-parser 0.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "semver-parser"
version = "0.7.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-27 13:14:58 +01:00
[[package]]
name = "serde"
version = "1.0.15"
2016-02-15 10:47:56 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "serde_derive"
version = "1.0.15"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"quote 0.3.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"serde_derive_internals 0.16.0 (registry+https://github.com/rust-lang/crates.io-index)",
"syn 0.11.11 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "serde_derive_internals"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.16.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"syn 0.11.11 (registry+https://github.com/rust-lang/crates.io-index)",
"synom 0.11.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "serde_ignored"
version = "0.0.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "serde_json"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "1.0.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"dtoa 0.4.2 (registry+https://github.com/rust-lang/crates.io-index)",
"itoa 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "serde_urlencoded"
2017-07-06 11:36:15 +02:00
version = "0.5.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"dtoa 0.4.2 (registry+https://github.com/rust-lang/crates.io-index)",
"itoa 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)",
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"url 1.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
2016-05-27 13:03:00 +02:00
[[package]]
name = "sha1"
2016-08-08 17:03:25 +02:00
version = "0.2.0"
2016-05-27 13:03:00 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-12-13 23:38:29 +01:00
[[package]]
name = "shell32-sys"
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-10-21 11:57:30 +02:00
[[package]]
name = "siphasher"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "siphasher"
version = "0.2.2"
2016-10-21 11:57:30 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "skeptic"
version = "0.4.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"pulldown-cmark 0.0.3 (registry+https://github.com/rust-lang/crates.io-index)",
"tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "slab"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-10-30 09:56:34 +01:00
[[package]]
name = "slab"
version = "0.3.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "smallvec"
version = "0.2.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "smallvec"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.4.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
2017-03-29 19:59:20 +02:00
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
2017-03-29 19:59:20 +02:00
]
[[package]]
name = "snappy"
version = "0.1.0"
source = "git+https://github.com/paritytech/rust-snappy#858eac97192ea25d18d3f3626a8cc13ca0b175bb"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"snappy-sys 0.1.0 (git+https://github.com/paritytech/rust-snappy)",
]
[[package]]
name = "snappy-sys"
version = "0.1.0"
source = "git+https://github.com/paritytech/rust-snappy#858eac97192ea25d18d3f3626a8cc13ca0b175bb"
dependencies = [
"gcc 0.3.54 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-04-27 22:41:46 +02:00
[[package]]
name = "spmc"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.2.2"
2016-04-27 22:41:46 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "stable_deref_trait"
version = "1.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2017-02-17 16:18:31 +01:00
[[package]]
name = "stats"
version = "0.1.0"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-02-17 16:18:31 +01:00
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "strsim"
version = "0.6.0"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "subtle"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "syn"
version = "0.11.11"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"quote 0.3.15 (registry+https://github.com/rust-lang/crates.io-index)",
"synom 0.11.3 (registry+https://github.com/rust-lang/crates.io-index)",
"unicode-xid 0.0.4 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "synom"
version = "0.11.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"unicode-xid 0.0.4 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-05-05 23:54:15 +02:00
[[package]]
name = "syntex"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.58.1"
2016-05-05 23:54:15 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"syntex_errors 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex_syntax 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-05-05 23:54:15 +02:00
]
[[package]]
name = "syntex_errors"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.58.1"
2016-05-05 23:54:15 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex_pos 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
"term 0.4.6 (registry+https://github.com/rust-lang/crates.io-index)",
"unicode-xid 0.0.4 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "syntex_pos"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.58.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "syntex_syntax"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.58.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bitflags 0.8.2 (registry+https://github.com/rust-lang/crates.io-index)",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex_errors 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
"syntex_pos 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)",
"unicode-xid 0.0.4 (registry+https://github.com/rust-lang/crates.io-index)",
2016-05-05 23:54:15 +02:00
]
[[package]]
name = "table"
version = "0.1.0"
[[package]]
name = "take"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-22 09:04:44 +01:00
[[package]]
name = "target_info"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-11-02 17:14:05 +01:00
[[package]]
name = "tempdir"
version = "0.3.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
2016-11-02 17:14:05 +01:00
]
[[package]]
name = "term"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.4.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
2016-04-24 19:10:56 +02:00
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "term_size"
version = "0.3.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-04-24 19:10:56 +02:00
[[package]]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
name = "textwrap"
version = "0.8.0"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"term_size 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
"unicode-width 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-24 19:10:56 +02:00
]
[[package]]
name = "thread_local"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.3.4"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
"unreachable 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-03-09 14:11:15 +01:00
]
[[package]]
name = "threadpool"
version = "1.7.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"num_cpus 1.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "time"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.38"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
2016-04-24 19:10:56 +02:00
"kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"redox_syscall 0.1.31 (registry+https://github.com/rust-lang/crates.io-index)",
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "tiny-keccak"
2017-08-07 10:06:02 +02:00
version = "1.3.1"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "tokio-core"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.9"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
Fixing secretstore TODOs - part 1 (#5386) * ECDKG protocol prototype * added test for enc/dec math * get rid of decryption_session * added licenses * fix after merge * get rid of unused serde dependency * doc * decryption session [without commutative enc] * failed_dec_session * fixed tests * added commen * added more decryption session tests * helper to localize an issue * more computations to localize error * decryption_session::SessionParams * added tests for EC math to localize problem * secretstore network transport * encryption_session_works_over_network * network errors processing * connecting to KeyServer * licenses * get rid of debug println-s * fixed secretstore args * encryption results are stored in KS database * decryption protocol works over network * enc/dec Session traits * fixing warnings * fix after merge * on-chain ACL checker proto * fixed compilation * fixed compilation * finally fixed <odd>-of-N-scheme * temporary commented test * 1-of-N works in math * scheme 1-of-N works * updated AclStorage with real contract ABI * remove unnecessary unsafety * fixed grumbles * wakeup on access denied * encrypt secretstore messages * 'shadow' decryption * fix grumbles * lost files * secretstore cli-options * decryption seccion when ACL check failed on master * disallow regenerating key for existing document * removed obsolete TODO * fix after merge * switched to tokio_io * fix after merge * fix after merge * fix after merge * fix after merge * fix after merge * fixed test * fix after merge
2017-04-08 11:26:16 +02:00
"iovec 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mio 0.6.10 (registry+https://github.com/rust-lang/crates.io-index)",
"scoped-tls 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "tokio-io"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "tokio-named-pipes"
version = "0.1.0"
source = "git+https://github.com/nikvolf/tokio-named-pipes#0b9b728eaeb0a6673c287ac7692be398fd651752"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"mio-named-pipes 0.1.4 (git+https://github.com/alexcrichton/mio-named-pipes)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "tokio-proto"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"net2 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
"smallvec 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
"take 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-service 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "tokio-service"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "tokio-timer"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "tokio-tls"
version = "0.1.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"native-tls 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "tokio-uds"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)",
"iovec 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mio 0.6.10 (registry+https://github.com/rust-lang/crates.io-index)",
"mio-uds 0.6.4 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)",
"tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-09-10 11:37:14 +02:00
[[package]]
name = "toml"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.4.5"
2016-09-10 11:37:14 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)",
2016-09-10 11:37:14 +02:00
]
[[package]]
name = "traitobject"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "transaction-pool"
version = "1.9.0"
dependencies = [
"error-chain 0.11.0 (registry+https://github.com/rust-lang/crates.io-index)",
"ethcore-bigint 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"smallvec 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-23 18:51:29 +01:00
[[package]]
name = "transient-hashmap"
version = "0.4.0"
2016-02-27 15:56:41 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-23 18:51:29 +01:00
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "trezor-sys"
version = "1.0.0"
source = "git+https://github.com/paritytech/trezor-sys#8a401705e58c83db6c29c199d9577b78fde40709"
dependencies = [
"protobuf 1.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-23 18:51:29 +01:00
]
[[package]]
name = "triehash"
version = "0.1.0"
dependencies = [
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "typeable"
version = "0.1.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "unexpected"
version = "0.1.0"
2016-02-14 17:35:45 +01:00
[[package]]
name = "unicase"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "1.4.2"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"version_check 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "unicase"
version = "2.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"rustc_version 0.1.7 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "unicode-bidi"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.3.4"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"matches 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "unicode-normalization"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.5"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "unicode-segmentation"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "1.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "unicode-width"
version = "0.1.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "unicode-xid"
version = "0.0.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "unreachable"
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"void 1.0.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-02-14 19:30:37 +01:00
[[package]]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
name = "unreachable"
version = "1.0.0"
2017-02-14 19:30:37 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
dependencies = [
"void 1.0.2 (registry+https://github.com/rust-lang/crates.io-index)",
]
2017-02-14 19:30:37 +01:00
2016-04-24 19:10:56 +02:00
[[package]]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
name = "untrusted"
version = "0.5.1"
2016-04-24 19:10:56 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
[[package]]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
name = "url"
version = "1.5.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"idna 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)",
"matches 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)",
"percent-encoding 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
[[package]]
name = "using_queue"
version = "0.1.0"
2016-02-14 17:35:45 +01:00
[[package]]
name = "utf8-ranges"
version = "1.0.0"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-04-11 13:21:55 +02:00
[[package]]
name = "util-error"
version = "0.1.0"
dependencies = [
"error-chain 0.11.0 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"kvdb 0.1.0",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
"rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)",
]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
[[package]]
name = "vcpkg"
version = "0.2.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "vec_map"
version = "0.8.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-04-07 14:24:52 +02:00
[[package]]
name = "vecio"
version = "0.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-04-07 14:24:52 +02:00
"ws2_32-sys 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-21 21:14:09 +01:00
[[package]]
name = "vergen"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.1"
2016-02-21 21:14:09 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bitflags 0.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-21 21:14:09 +01:00
]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
[[package]]
name = "version_check"
version = "0.1.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "vm"
version = "0.1.0"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"common-types 0.1.0",
2017-11-06 16:31:15 +01:00
"ethcore-bigint 0.2.1",
"ethcore-bytes 0.1.0",
2017-10-12 23:44:02 +02:00
"ethcore-util 1.9.0",
"ethjson 0.1.0",
2017-11-10 19:04:55 +01:00
"keccak-hash 0.1.0",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"patricia-trie 0.1.0",
2017-11-10 20:21:24 +01:00
"rlp 0.2.1",
]
2016-04-07 14:24:52 +02:00
[[package]]
name = "void"
2016-04-24 19:10:56 +02:00
version = "1.0.2"
2016-04-07 14:24:52 +02:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "wasm"
version = "0.1.0"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"ethcore-bigint 0.2.1",
"ethcore-logger 1.9.0",
"ethcore-util 1.9.0",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-12 22:21:15 +01:00
"parity-wasm 0.15.3 (registry+https://github.com/rust-lang/crates.io-index)",
"vm 0.1.0",
"wasm-utils 0.1.0 (git+https://github.com/paritytech/wasm-utils)",
]
[[package]]
name = "wasm-utils"
version = "0.1.0"
source = "git+https://github.com/paritytech/wasm-utils#3d59f7ca0661317bc66894a26b2a5a319fa5d229"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
"clap 2.26.2 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"env_logger 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)",
"glob 0.2.11 (registry+https://github.com/rust-lang/crates.io-index)",
"lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
2017-11-12 22:21:15 +01:00
"parity-wasm 0.15.3 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "winapi"
2016-12-13 23:38:29 +01:00
version = "0.2.8"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "winapi-build"
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
[[package]]
name = "ws"
2017-07-06 11:36:15 +02:00
version = "0.7.1"
source = "git+https://github.com/tomusdrw/ws-rs#f8306a798b7541d64624299a83a2c934f173beed"
dependencies = [
"byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)",
"httparse 1.2.3 (registry+https://github.com/rust-lang/crates.io-index)",
"log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)",
"mio 0.6.10 (registry+https://github.com/rust-lang/crates.io-index)",
"rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)",
"sha1 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)",
"slab 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"url 1.5.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-02-14 17:35:45 +01:00
[[package]]
name = "ws2_32-sys"
version = "0.2.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
2016-12-13 23:38:29 +01:00
"winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
"winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)",
]
2016-12-13 23:38:29 +01:00
[[package]]
name = "xdg"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "2.1.0"
2016-12-13 23:38:29 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
2016-02-14 17:35:45 +01:00
[[package]]
name = "xml-rs"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.3.6"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"bitflags 0.7.0 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "xmltree"
2016-04-24 19:10:56 +02:00
version = "0.3.2"
2016-02-14 17:35:45 +01:00
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"xml-rs 0.3.6 (registry+https://github.com/rust-lang/crates.io-index)",
2016-02-14 17:35:45 +01:00
]
[[package]]
name = "zip"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
version = "0.1.19"
source = "registry+https://github.com/rust-lang/crates.io-index"
dependencies = [
"flate2 0.2.20 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"msdos_time 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)",
"podio 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)",
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)",
]
[metadata]
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum adler32 1.0.2 (registry+https://github.com/rust-lang/crates.io-index)" = "6cbd0b9af8587c72beadc9f72d35b9fbb070982c9e6203e46e93f10df25f8f45"
"checksum advapi32-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "e06588080cb19d0acb6739808aafa5f26bfb2ca015b2b6370028b44cf7cb8a9a"
"checksum aho-corasick 0.6.3 (registry+https://github.com/rust-lang/crates.io-index)" = "500909c4f87a9e52355b26626d890833e9e1d53ac566db76c36faa984b889699"
"checksum ansi_term 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)" = "23ac7c30002a5accbf7e8987d0632fa6de155b7c3d39d0067317a391e00a2ef6"
2016-12-13 23:38:29 +01:00
"checksum app_dirs 1.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "b7d1c0d48a81bbb13043847f957971f4d87c81542d80ece5e84ba3cba4058fd4"
2017-11-18 23:14:57 +01:00
"checksum arrayvec 0.4.4 (registry+https://github.com/rust-lang/crates.io-index)" = "1c0250693b17316353df525fb088da32a8c18f84eb65d113dde31f5a76ed17b6"
"checksum aster 0.41.0 (registry+https://github.com/rust-lang/crates.io-index)" = "4ccfdf7355d9db158df68f976ed030ab0f6578af811f5a7bb6dcf221ec24e0e0"
"checksum atty 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "d912da0db7fa85514874458ca3651fe2cddace8d0b0505571dbdcd41ab490159"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum backtrace 0.3.3 (registry+https://github.com/rust-lang/crates.io-index)" = "99f2ce94e22b8e664d95c57fff45b98a966c2252b60691d0b7aeeccd88d70983"
"checksum backtrace-sys 0.1.14 (registry+https://github.com/rust-lang/crates.io-index)" = "c63ea141ef8fdb10409d0f5daf30ac51f84ef43bff66f16627773d2a292cd189"
2017-02-14 19:30:37 +01:00
"checksum base-x 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "2f59103b47307f76e03bef1633aec7fa9e29bfb5aa6daf5a334f94233c71f6c1"
"checksum base32 0.3.1 (registry+https://github.com/rust-lang/crates.io-index)" = "1b9605ba46d61df0410d8ac686b0007add8172eba90e8e909c347856fe794d8c"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum base64 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)" = "96434f987501f0ed4eb336a411e0631ecd1afa11574fe148587adc4ff96143c9"
"checksum bigint 4.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "5442186ef6560f30f1ee4b9c1e4c87a35a6879d3644550cc248ec2b955eb5fcd"
"checksum bincode 0.8.0 (registry+https://github.com/rust-lang/crates.io-index)" = "e103c8b299b28a9c6990458b7013dc4a8356a9b854c51b9883241f5866fac36e"
"checksum bit-set 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "e6e1e6fb1c9e3d6fcdec57216a74eaa03e41f52a22f13a16438251d8e88b89da"
"checksum bit-set 0.4.0 (registry+https://github.com/rust-lang/crates.io-index)" = "d9bf6104718e80d7b26a68fdbacff3481cfc05df670821affc7e9cbc1884400c"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum bit-vec 0.4.4 (registry+https://github.com/rust-lang/crates.io-index)" = "02b4ff8b16e6076c3e14220b39fbc1fabb6737522281a388998046859400895f"
"checksum bitflags 0.7.0 (registry+https://github.com/rust-lang/crates.io-index)" = "aad18937a628ec6abcd26d1489012cc0e18c21798210f491af69ded9b881106d"
"checksum bitflags 0.8.2 (registry+https://github.com/rust-lang/crates.io-index)" = "1370e9fc2a6ae53aea8b7a5110edbd08836ed87c88736dfabccade1c2b44bff4"
"checksum bitflags 0.9.1 (registry+https://github.com/rust-lang/crates.io-index)" = "4efd02e230a02e18f92fc2735f44597385ed02ad8f831e7c1c1156ee5e1ab3a5"
"checksum bloomchain 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "3f421095d2a76fc24cd3fb3f912b90df06be7689912b1bdb423caefae59c258d"
2017-03-28 00:42:37 +02:00
"checksum bn 0.4.4 (git+https://github.com/paritytech/bn)" = "<none>"
"checksum byteorder 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "ff81738b726f5d099632ceaffe7fb65b90212e8dce59d518729e7e8634032d3d"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum bytes 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)" = "d828f97b58cc5de3e40c421d0cf2132d6b2da4ee0e11b8632fa838f0f9333ad6"
"checksum cc 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)" = "7db2f146208d7e0fbee761b09cd65a7f51ccc38705d4e7262dad4d73b12a76b1"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum cfg-if 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)" = "d4c819a1287eb618df47cc647173c5c4c66ba19d888a6e50d605672aed3140de"
"checksum cid 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "34aa7da06f10541fbca6850719cdaa8fa03060a5d2fb33840f149cf8133a00c7"
"checksum clap 2.26.2 (registry+https://github.com/rust-lang/crates.io-index)" = "3451e409013178663435d6f15fdb212f14ee4424a3d74f979d081d0a66b6f1f2"
"checksum coco 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "c06169f5beb7e31c7c67ebf5540b8b472d23e3eade3b2ec7d1f5b504a85f91bd"
"checksum conv 0.3.3 (registry+https://github.com/rust-lang/crates.io-index)" = "78ff10625fd0ac447827aa30ea8b861fead473bb60aeb73af6c1c58caf0d1299"
"checksum cookie 0.3.1 (registry+https://github.com/rust-lang/crates.io-index)" = "d53b80dde876f47f03cda35303e368a79b91c70b0d65ecba5fd5280944a08591"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum core-foundation 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)" = "25bfd746d203017f7d5cbd31ee5d8e17f94b6521c7af77ece6c9e4b2d4b16c67"
"checksum core-foundation-sys 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)" = "065a5d7ffdcbc8fa145d6f0746f3555025b9097a9e9cda59f7467abae670c78d"
"checksum crossbeam 0.2.10 (registry+https://github.com/rust-lang/crates.io-index)" = "0c5ea215664ca264da8a9d9c3be80d2eaf30923c259d03e870388eb927508f97"
2017-08-22 17:05:28 +02:00
"checksum crunchy 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)" = "a2f4a431c5c9f662e1200b7c7f02c34e91361150e382089a8f2dec3ba680cbda"
"checksum crypt32-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "e34988f7e069e0b2f3bfc064295161e489b2d4e04a2e4248fb94360cdf00b4ec"
"checksum ctrlc 1.1.1 (git+https://github.com/paritytech/rust-ctrlc.git)" = "<none>"
"checksum custom_derive 0.1.7 (registry+https://github.com/rust-lang/crates.io-index)" = "ef8ae57c4978a2acd8b869ce6b9ca1dfe817bff704c220209fdef2c0b75a01b9"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum daemonize 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)" = "0239832c1b4ca406d5ec73728cf4c7336d25cf85dd32db9e047e9e706ee0e935"
"checksum dbghelp-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "97590ba53bcb8ac28279161ca943a924d1fd4a8fb3fa63302591647c4fc5b850"
"checksum difference 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)" = "b3304d19798a8e067e48d8e69b2c37f0b5e9b4e462504ad9e27e9f3fce02bba8"
2017-07-06 11:36:15 +02:00
"checksum docopt 0.8.1 (registry+https://github.com/rust-lang/crates.io-index)" = "3b5b93718f8b3e5544fcc914c43de828ca6c6ace23e0332c6080a2977b49787a"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum dtoa 0.4.2 (registry+https://github.com/rust-lang/crates.io-index)" = "09c3753c3db574d215cba4ea76018483895d7bff25a31b49ba45db21c48e50ab"
"checksum edit-distance 2.0.0 (registry+https://github.com/rust-lang/crates.io-index)" = "6a34f5204fbc13582de418611cf3a7dcdd07c6d312a5b631597ba72c06b9d9c9"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum either 1.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "18785c1ba806c258137c937e44ada9ee7e69a37e3c72077542cd2f069d78562a"
"checksum elastic-array 0.9.0 (registry+https://github.com/rust-lang/crates.io-index)" = "258ff6a9a94f648d0379dbd79110e057edbb53eb85cc237e33eadf8e5a30df85"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum env_logger 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)" = "3ddf21e73e016298f5cb37d6ef8e8da8e39f91f9ec8b0df44b7deb16a9f8cd5b"
"checksum error-chain 0.11.0 (registry+https://github.com/rust-lang/crates.io-index)" = "ff511d5dc435d703f4971bc399647c9bc38e20cb41452e3b9feb4765419ed3f3"
2017-11-18 23:14:57 +01:00
"checksum eth-secp256k1 0.5.7 (git+https://github.com/paritytech/rust-secp256k1)" = "<none>"
"checksum ethabi 4.0.1 (registry+https://github.com/rust-lang/crates.io-index)" = "c819a3adef0413a2519cbd9a19a35dd1c20c7a0110705beaba8aa4aa87eda95f"
"checksum ethcore-bigint 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)" = "bcb5af77e74a8f70e9c3337e069c37bc82178ef1b459c02091f73c4ad5281eb5"
2016-12-05 18:15:05 +01:00
"checksum fdlimit 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "b1ee15a7050e5580b3712877157068ea713b245b080ff302ae2ca973cfcd9baa"
"checksum flate2 0.2.20 (registry+https://github.com/rust-lang/crates.io-index)" = "e6234dd4468ae5d1e2dbb06fe2b058696fdc50a339c68a393aefbf00bc81e423"
"checksum fnv 1.0.5 (registry+https://github.com/rust-lang/crates.io-index)" = "6cc484842f1e2884faf56f529f960cc12ad8c71ce96cc7abba0a067c98fee344"
"checksum foreign-types 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "3e4056b9bd47f8ac5ba12be771f77a0dae796d1bbaaf5fd0b9c2d38b69b8a29d"
"checksum fs2 0.4.2 (registry+https://github.com/rust-lang/crates.io-index)" = "9ab76cfd2aaa59b7bf6688ad9ba15bbae64bff97f04ea02144cfd3443e5c2866"
"checksum futures 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)" = "05a23db7bd162d4e8265968602930c476f688f0c180b44bdaf55e0cb2c687558"
"checksum futures-cpupool 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)" = "77d49e7de8b91b20d6fda43eea906637eff18b96702eb6b2872df8bfab1ad2b5"
"checksum gcc 0.3.54 (registry+https://github.com/rust-lang/crates.io-index)" = "5e33ec290da0d127825013597dbdfc28bee4964690c7ce1166cbc2a7bd08b1bb"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum getopts 0.2.15 (registry+https://github.com/rust-lang/crates.io-index)" = "65922871abd2f101a2eb0eaebadc66668e54a87ad9c3dd82520b5f86ede5eff9"
"checksum glob 0.2.11 (registry+https://github.com/rust-lang/crates.io-index)" = "8be18de09a56b60ed0edf84bc9df007e30040691af7acd1c41874faac5895bfb"
"checksum globset 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)" = "90d069fe6beb9be359ef505650b3f73228c5591a3c4b1f32be2f4f44459ffa3a"
"checksum hamming 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)" = "65043da274378d68241eb9a8f8f8aa54e349136f7b8e12f63e3ef44043cc30e1"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum heapsize 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)" = "54fab2624374e5137ae4df13bf32b0b269cb804df42d13a51221bbd431d1a237"
"checksum heck 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)" = "e0db42a2924a5d7d628685e7a8cf9a2edd628650a9d01efc3dde35d3cdd22451"
"checksum hex 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "d6a22814455d41612f41161581c2883c0c6a1c41852729b17d5ed88f01e153aa"
"checksum hidapi 0.3.1 (git+https://github.com/paritytech/hidapi-rs)" = "<none>"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum httparse 1.2.3 (registry+https://github.com/rust-lang/crates.io-index)" = "af2f2dd97457e8fb1ae7c5a420db346af389926e36f43768b96f101546b04a07"
"checksum hyper 0.10.0-a.0 (git+https://github.com/paritytech/hyper)" = "<none>"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum hyper 0.10.13 (registry+https://github.com/rust-lang/crates.io-index)" = "368cb56b2740ebf4230520e2b90ebb0461e69034d85d1945febd9b3971426db2"
"checksum hyper 0.11.2 (registry+https://github.com/rust-lang/crates.io-index)" = "641abc3e3fcf0de41165595f801376e01106bca1fd876dda937730e477ca004c"
"checksum hyper-tls 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)" = "9c81fa95203e2a6087242c38691a0210f23e9f3f8f944350bd676522132e2985"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum idna 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)" = "014b298351066f1512874135335d62a789ffe78a9974f94b43ed5621951eaf7d"
"checksum igd 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)" = "356a0dc23a4fa0f8ce4777258085d00a01ea4923b2efd93538fc44bf5e1bda76"
2017-02-20 16:42:09 +01:00
"checksum integer-encoding 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)" = "a053c9c7dcb7db1f2aa012c37dc176c62e4cdf14898dee0eecc606de835b8acb"
2017-11-14 12:59:01 +01:00
"checksum interleaved-ordered 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "141340095b15ed7491bd3d4ced9d20cebfb826174b6bb03386381f62b01e3d77"
"checksum iovec 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "29d062ee61fccdf25be172e70f34c9f6efc597e1fb8f6526e8437b2046ab26be"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum ipnetwork 0.12.7 (registry+https://github.com/rust-lang/crates.io-index)" = "2134e210e2a024b5684f90e1556d5f71a1ce7f8b12e9ac9924c67fb36f63b336"
"checksum isatty 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)" = "fa500db770a99afe2a0f2229be2a3d09c7ed9d7e4e8440bf71253141994e240f"
"checksum itertools 0.5.10 (registry+https://github.com/rust-lang/crates.io-index)" = "4833d6978da405305126af4ac88569b5d71ff758581ce5a987dbfa3755f694fc"
"checksum itoa 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)" = "8324a32baf01e2ae060e9de58ed0bc2320c9a2833491ee36cd3b4c414de4db8c"
2017-11-13 22:52:25 +01:00
"checksum jsonrpc-core 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)" = "<none>"
"checksum jsonrpc-http-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)" = "<none>"
"checksum jsonrpc-ipc-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)" = "<none>"
"checksum jsonrpc-macros 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)" = "<none>"
"checksum jsonrpc-pubsub 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)" = "<none>"
"checksum jsonrpc-server-utils 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)" = "<none>"
"checksum jsonrpc-tcp-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)" = "<none>"
"checksum jsonrpc-ws-server 8.0.0 (git+https://github.com/paritytech/jsonrpc.git?branch=parity-1.9)" = "<none>"
"checksum kernel32-sys 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "7507624b29483431c0ba2d82aece8ca6cdba9382bff4ddd0f7490560c056098d"
"checksum language-tags 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "a91d884b6667cd606bb5a69aa0c99ba811a115fc68915e7056ec08a46e93199a"
"checksum lazy_static 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)" = "3b37545ab726dd833ec6420aaba8231c5b320814b9029ad585555d2a03e94fbf"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum lazycell 0.5.1 (registry+https://github.com/rust-lang/crates.io-index)" = "3b585b7a6811fb03aa10e74b278a0f00f8dd9b45dc681f148bb29fa5cb61859b"
"checksum libc 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)" = "d1419b2939a0bc44b77feb34661583c7546b532b192feab36249ab584b86856c"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum libflate 0.1.11 (registry+https://github.com/rust-lang/crates.io-index)" = "a2aa04ec0100812d31a5366130ff9e793291787bc31da845bede4a00ea329830"
"checksum libusb 0.3.0 (git+https://github.com/paritytech/libusb-rs)" = "<none>"
"checksum libusb-sys 0.2.3 (git+https://github.com/paritytech/libusb-sys)" = "<none>"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum linked-hash-map 0.4.2 (registry+https://github.com/rust-lang/crates.io-index)" = "7860ec297f7008ff7a1e3382d7f7e1dcd69efc94751a2284bafc3d013c2aa939"
"checksum linked-hash-map 0.5.0 (registry+https://github.com/rust-lang/crates.io-index)" = "2d2aab0478615bb586559b0114d94dd8eca4fdbb73b443adcb0d00b61692b4bf"
"checksum local-encoding 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "e1ceb20f39ff7ae42f3ff9795f3986b1daad821caaa1e1732a0944103a5a1a66"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum log 0.3.8 (registry+https://github.com/rust-lang/crates.io-index)" = "880f77541efa6e5cc74e76910c9884d9859683118839d6a1dc3b11e63512565b"
"checksum lru-cache 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "4d06ff7ff06f729ce5f4e227876cb88d10bc59cd4ae1e09fbb2bde15c850dc21"
"checksum magenta 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "4bf0336886480e671965f794bc9b6fce88503563013d1bfb7a502c81fe3ac527"
"checksum magenta-sys 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "40d014c7011ac470ae28e2f76a02bfea4a8480f73e701353b49ad7a8d75f4699"
"checksum matches 0.1.6 (registry+https://github.com/rust-lang/crates.io-index)" = "100aabe6b8ff4e4a7e32c1c13523379802df0772b82466207ac25b013f193376"
"checksum memchr 1.0.1 (registry+https://github.com/rust-lang/crates.io-index)" = "1dbccc0e46f1ea47b9f17e6d67c5a96bd27030519c519c9c91327e31275a47b4"
"checksum memmap 0.5.2 (registry+https://github.com/rust-lang/crates.io-index)" = "46f3c7359028b31999287dae4e5047ddfe90a23b7dca2282ce759b491080c99b"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum mime 0.2.6 (registry+https://github.com/rust-lang/crates.io-index)" = "ba626b8a6de5da682e1caa06bdb42a335aee5a84db8e5046a3e8ab17ba0a3ae0"
"checksum mime 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)" = "e3d709ffbb330e1566dc2f2a3c9b58a5ad4a381f740b810cd305dc3f089bc160"
"checksum mime_guess 2.0.0-alpha.2 (registry+https://github.com/rust-lang/crates.io-index)" = "27a5e6679a0614e25adc14c6434ba84e41632b765a6d9cb2031a0cca682699ae"
"checksum miniz-sys 0.1.10 (registry+https://github.com/rust-lang/crates.io-index)" = "609ce024854aeb19a0ef7567d348aaa5a746b32fb72e336df7fcc16869d7e2b4"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum mio 0.6.10 (registry+https://github.com/rust-lang/crates.io-index)" = "dbd91d3bfbceb13897065e97b2ef177a09a438cb33612b2d371bf568819a9313"
"checksum mio-named-pipes 0.1.4 (git+https://github.com/alexcrichton/mio-named-pipes)" = "<none>"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum mio-uds 0.6.4 (registry+https://github.com/rust-lang/crates.io-index)" = "1731a873077147b626d89cc6c2a0db6288d607496c5d10c0cfcf3adc697ec673"
"checksum miow 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)" = "8c1f2f3b1cf331de6896aabf6e9d55dca90356cc9960cca7eaaf408a355ae919"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum msdos_time 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)" = "65ba9d75bcea84e07812618fedf284a64776c2f2ea0cad6bca7f69739695a958"
2017-02-14 19:30:37 +01:00
"checksum multibase 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)" = "b9c35dac080fd6e16a99924c8dfdef0af89d797dd851adab25feaffacf7850d6"
"checksum multihash 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)" = "d14363c7695e2e5adbbb8fe139d806a19b8b13f02b9b1fb770fab0c12edaff58"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum native-tls 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)" = "04b781c9134a954c84f0594b9ab3f5606abc516030388e8511887ef4c204a1e5"
"checksum net2 0.2.31 (registry+https://github.com/rust-lang/crates.io-index)" = "3a80f842784ef6c9a958b68b7516bc7e35883c614004dd94959a4dca1b716c09"
"checksum nodrop 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)" = "52cd74cd09beba596430cc6e3091b74007169a56246e1262f0ba451ea95117b2"
2017-10-24 12:12:15 +02:00
"checksum ntp 0.3.1 (registry+https://github.com/rust-lang/crates.io-index)" = "143149743832c6543b60a8ef2a26cd9122dfecec2b767158e852a7beecf6d7a0"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum num 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)" = "a311b77ebdc5dd4cf6449d81e4135d9f0e3b153839ac90e648a8ef538f923525"
"checksum num-bigint 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)" = "8fd0f8dbb4c0960998958a796281d88c16fbe68d87b1baa6f31e2979e81fd0bd"
"checksum num-complex 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)" = "503e668405c5492d67cf662a81e05be40efe2e6bcf10f7794a07bd9865e704e6"
"checksum num-integer 0.1.35 (registry+https://github.com/rust-lang/crates.io-index)" = "d1452e8b06e448a07f0e6ebb0bb1d92b8890eea63288c0b627331d53514d0fba"
"checksum num-iter 0.1.34 (registry+https://github.com/rust-lang/crates.io-index)" = "7485fcc84f85b4ecd0ea527b14189281cf27d60e583ae65ebc9c088b13dffe01"
"checksum num-rational 0.1.39 (registry+https://github.com/rust-lang/crates.io-index)" = "288629c76fac4b33556f4b7ab57ba21ae202da65ba8b77466e6d598e31990790"
"checksum num-traits 0.1.40 (registry+https://github.com/rust-lang/crates.io-index)" = "99843c856d68d8b4313b03a17e33c4bb42ae8f6610ea81b28abe076ac721b9b0"
"checksum num_cpus 1.7.0 (registry+https://github.com/rust-lang/crates.io-index)" = "514f0d73e64be53ff320680ca671b64fe3fb91da01e1ae2ddc99eb51d453b20d"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum number_prefix 0.2.7 (registry+https://github.com/rust-lang/crates.io-index)" = "59a14be9c211cb9c602bad35ac99f41e9a84b44d71b8cbd3040e3bd02a214902"
"checksum odds 0.2.25 (registry+https://github.com/rust-lang/crates.io-index)" = "c3df9b730298cea3a1c3faa90b7e2f9df3a9c400d0936d6015e6165734eefcba"
2016-12-13 23:38:29 +01:00
"checksum ole32-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "5d2c49021782e5233cd243168edfa8037574afed4eba4bbaf538b3d8d1789d8c"
"checksum openssl 0.9.19 (registry+https://github.com/rust-lang/crates.io-index)" = "816914b22eb15671d62c73442a51978f311e911d6a6f6cbdafa6abce1b5038fc"
"checksum openssl-sys 0.9.19 (registry+https://github.com/rust-lang/crates.io-index)" = "1e4c63a7d559c1e5afa6d6a9e6fa34bbc5f800ffc9ae08b72c605420b0c4f5e8"
"checksum order-stat 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)" = "efa535d5117d3661134dbf1719b6f0ffe06f2375843b13935db186cd094105eb"
"checksum ordered-float 0.5.0 (registry+https://github.com/rust-lang/crates.io-index)" = "58d25b6c0e47b20d05226d288ff434940296e7e2f8b877975da32f862152241f"
"checksum owning_ref 0.3.3 (registry+https://github.com/rust-lang/crates.io-index)" = "cdf84f41639e037b484f93433aa3897863b561ed65c6e59c7073d7c561710f37"
2017-11-10 10:58:56 +01:00
"checksum parity-dapps-glue 1.9.1 (registry+https://github.com/rust-lang/crates.io-index)" = "261c025c67ba416e9fe63aa9b3236520ce3c74cfbe43590c9cdcec4ccc8180e4"
"checksum parity-tokio-ipc 0.1.5 (git+https://github.com/nikvolf/parity-tokio-ipc)" = "<none>"
"checksum parity-ui-old-precompiled 1.9.0 (git+https://github.com/js-dist-paritytech/parity-master-1-9-v1.git)" = "<none>"
"checksum parity-ui-precompiled 1.9.0 (git+https://github.com/js-dist-paritytech/parity-master-1-9-shell.git)" = "<none>"
2017-11-12 22:21:15 +01:00
"checksum parity-wasm 0.15.3 (registry+https://github.com/rust-lang/crates.io-index)" = "8431a184ad88cfbcd71a792aaca319cc7203a94300c26b8dce2d0df0681ea87d"
"checksum parity-wordlist 1.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "1d0dec124478845b142f68b446cbee953d14d4b41f1bc0425024417720dce693"
"checksum parking_lot 0.4.8 (registry+https://github.com/rust-lang/crates.io-index)" = "149d8f5b97f3c1133e3cfcd8886449959e856b557ff281e292b733d7c69e005e"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum parking_lot_core 0.2.6 (registry+https://github.com/rust-lang/crates.io-index)" = "4f610cb9664da38e417ea3225f23051f589851999535290e077939838ab7a595"
"checksum percent-encoding 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)" = "de154f638187706bde41d9b4738748933d64e6b37bdbffc0b47a97d16a6ae356"
"checksum phf 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)" = "cb325642290f28ee14d8c6201159949a872f220c62af6e110a56ea914fbe42fc"
"checksum phf_codegen 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)" = "d62594c0bb54c464f633175d502038177e90309daf2e0158be42ed5f023ce88f"
"checksum phf_generator 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)" = "6b07ffcc532ccc85e3afc45865469bf5d9e4ef5bfcf9622e3cfe80c2d275ec03"
"checksum phf_shared 0.7.21 (registry+https://github.com/rust-lang/crates.io-index)" = "07e24b0ca9643bdecd0632f2b3da6b1b89bbb0030e0b992afc1113b23a7bc2f2"
"checksum pkg-config 0.3.9 (registry+https://github.com/rust-lang/crates.io-index)" = "3a8b4c6b8165cd1a1cd4b9b120978131389f64bdaf456435caa41e630edba903"
"checksum plain_hasher 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "83ae80873992f511142c07d0ec6c44de5636628fdb7e204abd655932ea79d995"
"checksum podio 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)" = "e5422a1ee1bc57cc47ae717b0137314258138f38fd5f3cea083f43a9725383a0"
"checksum pretty_assertions 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)" = "2412f3332a07c7a2a50168988dcc184f32180a9758ad470390e5f55e089f6b6e"
"checksum primal 0.2.3 (registry+https://github.com/rust-lang/crates.io-index)" = "0e31b86efadeaeb1235452171a66689682783149a6249ff334a2c5d8218d00a4"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum primal-bit 0.2.4 (registry+https://github.com/rust-lang/crates.io-index)" = "686a64e2f50194c64942992af5799e6b6e8775b8f88c607d72ed0a2fd58b9b21"
"checksum primal-check 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "647c81b67bb9551a7b88d0bcd785ac35b7d0bf4b2f358683d7c2375d04daec51"
"checksum primal-estimate 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)" = "56ea4531dde757b56906493c8604641da14607bf9cdaa80fb9c9cabd2429f8d5"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum primal-sieve 0.2.7 (registry+https://github.com/rust-lang/crates.io-index)" = "e058e7a369c70c0103d138ef71f052a48b102592aadb8ca38ee80d85d303e1de"
"checksum protobuf 1.4.1 (registry+https://github.com/rust-lang/crates.io-index)" = "568a15e4d572d9a5e63ae3a55f84328c984842887db179b40b4cc6a608bac6a4"
"checksum pulldown-cmark 0.0.3 (registry+https://github.com/rust-lang/crates.io-index)" = "8361e81576d2e02643b04950e487ec172b687180da65c731c03cf336784e6c07"
"checksum quasi 0.32.0 (registry+https://github.com/rust-lang/crates.io-index)" = "18c45c4854d6d1cf5d531db97c75880feb91c958b0720f4ec1057135fec358b3"
"checksum quasi_codegen 0.32.0 (registry+https://github.com/rust-lang/crates.io-index)" = "51b9e25fa23c044c1803f43ca59c98dac608976dd04ce799411edd58ece776d4"
"checksum quasi_macros 0.32.0 (registry+https://github.com/rust-lang/crates.io-index)" = "29cec87bc2816766d7e4168302d505dd06b0a825aed41b00633d296e922e02dd"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum quick-error 1.2.1 (registry+https://github.com/rust-lang/crates.io-index)" = "eda5fe9b71976e62bc81b781206aaa076401769b2143379d3eb2118388babac4"
"checksum quote 0.3.15 (registry+https://github.com/rust-lang/crates.io-index)" = "7a6e920b65c65f10b2ae65c831a81a073a89edd28c7cce89475bff467ab4167a"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum rand 0.3.16 (registry+https://github.com/rust-lang/crates.io-index)" = "eb250fd207a4729c976794d03db689c9be1d634ab5a1c9da9492a13d8fecbcdf"
"checksum rayon 0.7.1 (registry+https://github.com/rust-lang/crates.io-index)" = "a77c51c07654ddd93f6cb543c7a849863b03abc7e82591afda6dc8ad4ac3ac4a"
"checksum rayon 0.8.2 (registry+https://github.com/rust-lang/crates.io-index)" = "b614fe08b6665cb9a231d07ac1364b0ef3cb3698f1239ee0c4c3a88a524f54c8"
"checksum rayon-core 1.2.1 (registry+https://github.com/rust-lang/crates.io-index)" = "7febc28567082c345f10cddc3612c6ea020fc3297a1977d472cf9fdb73e6e493"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum redox_syscall 0.1.31 (registry+https://github.com/rust-lang/crates.io-index)" = "8dde11f18c108289bef24469638a04dce49da56084f2d50618b226e47eb04509"
"checksum regex 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "1731164734096285ec2a5ec7fea5248ae2f5485b3feeb0115af4fda2183b2d1b"
"checksum regex-syntax 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)" = "ad890a5eef7953f55427c50575c680c42841653abd2b028b68cd223d157f62db"
"checksum reqwest 0.7.3 (registry+https://github.com/rust-lang/crates.io-index)" = "5866613d84e2a39c0479a960bf2d0eff1fbfc934f02cd42b5c08c1e1efc5b1fd"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum ring 0.9.7 (registry+https://github.com/rust-lang/crates.io-index)" = "24293de46bac74c9b9c05b40ff8496bbc8b9ae242a9b89f754e1154a43bc7c4c"
"checksum rocksdb 0.4.5 (git+https://github.com/paritytech/rust-rocksdb)" = "<none>"
"checksum rocksdb-sys 0.3.0 (git+https://github.com/paritytech/rust-rocksdb)" = "<none>"
"checksum rotor 0.6.3 (git+https://github.com/tailhook/rotor)" = "<none>"
"checksum rpassword 1.0.2 (registry+https://github.com/rust-lang/crates.io-index)" = "b273c91bd242ca03ad6d71c143b6f17a48790e61f21a6c78568fa2b6774a24a4"
"checksum rprompt 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)" = "1601f32bc5858aae3cbfa1c645c96c4d820cc5c16be0194f089560c00b6eb625"
"checksum rust-crypto 0.2.36 (registry+https://github.com/rust-lang/crates.io-index)" = "f76d05d3993fd5f4af9434e8e436db163a12a9d40e1a58a726f27a01dfd12a2a"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum rustc-demangle 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)" = "aee45432acc62f7b9a108cc054142dac51f979e69e71ddce7d6fc7adf29e817e"
2017-07-06 11:36:15 +02:00
"checksum rustc-hex 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)" = "0ceb8ce7a5e520de349e1fa172baeba4a9e8d5ef06c47471863530bc4972ee1e"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum rustc-serialize 0.3.24 (registry+https://github.com/rust-lang/crates.io-index)" = "dcf128d1287d2ea9d80910b5f1120d0b8eede3fbf1abe91c40d39ea7d51e6fda"
"checksum rustc_version 0.1.7 (registry+https://github.com/rust-lang/crates.io-index)" = "c5f5376ea5e30ce23c03eb77cbe4962b988deead10910c372b226388b594c084"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum rustc_version 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)" = "b9743a7670d88d5d52950408ecdb7c71d8986251ab604d4689dd2ca25c9bca69"
"checksum safemem 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "e27a8b19b835f7aea908818e871f5cc3a5a186550c30773be987e155e8163d8f"
"checksum schannel 0.1.8 (registry+https://github.com/rust-lang/crates.io-index)" = "7554288337c1110e34d7a2433518d889374c1de1a45f856b7bcddb03702131fc"
"checksum scoped-tls 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "f417c22df063e9450888a7561788e9bd46d3bb3c1466435b4eccb903807f147d"
"checksum scopeguard 0.3.2 (registry+https://github.com/rust-lang/crates.io-index)" = "c79eb2c3ac4bc2507cda80e7f3ac5b88bd8eae4c0914d5663e6a8933994be918"
"checksum secur32-sys 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "3f412dfa83308d893101dd59c10d6fda8283465976c28c287c5c855bf8d216bc"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum security-framework 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)" = "dfa44ee9c54ce5eecc9de7d5acbad112ee58755239381f687e564004ba4a2332"
"checksum security-framework-sys 0.1.16 (registry+https://github.com/rust-lang/crates.io-index)" = "5421621e836278a0b139268f36eee0dc7e389b784dc3f79d8f11aabadf41bead"
"checksum semver 0.1.20 (registry+https://github.com/rust-lang/crates.io-index)" = "d4f410fedcf71af0345d7607d246e7ad15faaadd49d240ee3b24e5dc21a820ac"
"checksum semver 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)" = "7a3186ec9e65071a2095434b1f5bb24838d4e8e130f584c790f6033c79943537"
"checksum semver-parser 0.7.0 (registry+https://github.com/rust-lang/crates.io-index)" = "388a1df253eca08550bef6c72392cfe7c30914bf41df5269b68cbd6ff8f570a3"
"checksum serde 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)" = "6a7046c9d4c6c522d10b2d098f9bebe2bef227e0e74044d8c1bfcf6b476af799"
"checksum serde_derive 1.0.15 (registry+https://github.com/rust-lang/crates.io-index)" = "1afcaae083fd1c46952a315062326bc9957f182358eb7da03b57ef1c688f7aa9"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum serde_derive_internals 0.16.0 (registry+https://github.com/rust-lang/crates.io-index)" = "bd381f6d01a6616cdba8530492d453b7761b456ba974e98768a18cad2cd76f58"
"checksum serde_ignored 0.0.4 (registry+https://github.com/rust-lang/crates.io-index)" = "190e9765dcedb56be63b6e0993a006c7e3b071a016a304736e4a315dc01fb142"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum serde_json 1.0.3 (registry+https://github.com/rust-lang/crates.io-index)" = "d243424e06f9f9c39e3cd36147470fd340db785825e367625f79298a6ac6b7ac"
2017-07-06 11:36:15 +02:00
"checksum serde_urlencoded 0.5.1 (registry+https://github.com/rust-lang/crates.io-index)" = "ce0fd303af908732989354c6f02e05e2e6d597152870f2c6990efb0577137480"
2016-08-08 17:03:25 +02:00
"checksum sha1 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "cc30b1e1e8c40c121ca33b86c23308a090d19974ef001b4bf6e61fd1a0fb095c"
2016-12-13 23:38:29 +01:00
"checksum shell32-sys 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "72f20b8f3c060374edb8046591ba28f62448c369ccbdc7b02075103fb3a9e38d"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum siphasher 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)" = "833011ca526bd88f16778d32c699d325a9ad302fa06381cd66f7be63351d3f6d"
"checksum siphasher 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "0df90a788073e8d0235a67e50441d47db7c8ad9debd91cbf43736a2a92d36537"
"checksum skeptic 0.4.0 (registry+https://github.com/rust-lang/crates.io-index)" = "24ebf8a06f5f8bae61ae5bbc7af7aac4ef6907ae975130faba1199e5fe82256a"
"checksum slab 0.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "6dbdd334bd28d328dad1c41b0ea662517883d8880d8533895ef96c8003dec9c4"
2016-10-30 09:56:34 +01:00
"checksum slab 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)" = "17b4fcaed89ab08ef143da37bc52adbcc04d4a69014f4c1208d6b51f0c47bc23"
"checksum smallvec 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)" = "4c8cbcd6df1e117c2210e13ab5109635ad68a929fcbb8964dc965b76cb5ee013"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum smallvec 0.4.3 (registry+https://github.com/rust-lang/crates.io-index)" = "8fcd03faf178110ab0334d74ca9631d77f94c8c11cc77fcb59538abf0025695d"
"checksum snappy 0.1.0 (git+https://github.com/paritytech/rust-snappy)" = "<none>"
"checksum snappy-sys 0.1.0 (git+https://github.com/paritytech/rust-snappy)" = "<none>"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum spmc 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "cd1f11d1fb5fd41834e55ce0b85a186efbf2f2afd9fdb09e2c8d72f9bff1ad1a"
"checksum stable_deref_trait 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)" = "15132e0e364248108c5e2c02e3ab539be8d6f5d52a01ca9bbf27ed657316f02b"
"checksum strsim 0.6.0 (registry+https://github.com/rust-lang/crates.io-index)" = "b4d15c810519a91cf877e7e36e63fe068815c678181439f2f29e2562147c3694"
"checksum subtle 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "7b811576c12506ff3f6da145585dc833edc32ee34c9fc021127d90e8134cc05c"
"checksum syn 0.11.11 (registry+https://github.com/rust-lang/crates.io-index)" = "d3b891b9015c88c576343b9b3e41c2c11a51c219ef067b264bd9c8aa9b441dad"
"checksum synom 0.11.3 (registry+https://github.com/rust-lang/crates.io-index)" = "a393066ed9010ebaed60b9eafa373d4b1baac186dd7e008555b0f702b51945b6"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum syntex 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)" = "a8f5e3aaa79319573d19938ea38d068056b826db9883a5d47f86c1cecc688f0e"
"checksum syntex_errors 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)" = "867cc5c2d7140ae7eaad2ae9e8bf39cb18a67ca651b7834f88d46ca98faadb9c"
"checksum syntex_pos 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)" = "13ad4762fe52abc9f4008e85c4fb1b1fe3aa91ccb99ff4826a439c7c598e1047"
"checksum syntex_syntax 0.58.1 (registry+https://github.com/rust-lang/crates.io-index)" = "6e0e4dbae163dd98989464c23dd503161b338790640e11537686f2ef0f25c791"
"checksum take 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "b157868d8ac1f56b64604539990685fa7611d8fa9e5476cf0c02cf34d32917c5"
"checksum target_info 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "c63f48baada5c52e65a29eef93ab4f8982681b67f9e8d29c7b05abcfec2b9ffe"
2016-11-02 17:14:05 +01:00
"checksum tempdir 0.3.5 (registry+https://github.com/rust-lang/crates.io-index)" = "87974a6f5c1dfb344d733055601650059a3363de2a6104819293baff662132d6"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum term 0.4.6 (registry+https://github.com/rust-lang/crates.io-index)" = "fa63644f74ce96fbeb9b794f66aff2a52d601cbd5e80f4b97123e3899f4570f1"
"checksum term_size 0.3.0 (registry+https://github.com/rust-lang/crates.io-index)" = "e2b6b55df3198cc93372e85dd2ed817f0e38ce8cc0f22eb32391bfad9c4bf209"
"checksum textwrap 0.8.0 (registry+https://github.com/rust-lang/crates.io-index)" = "df8e08afc40ae3459e4838f303e465aa50d823df8d7f83ca88108f6d3afe7edd"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum thread_local 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)" = "1697c4b57aeeb7a536b647165a2825faddffb1d3bad386d507709bd51a90bb14"
"checksum threadpool 1.7.1 (registry+https://github.com/rust-lang/crates.io-index)" = "e2f0c90a5f3459330ac8bc0d2f879c693bb7a2f59689c1083fc4ef83834da865"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum time 0.1.38 (registry+https://github.com/rust-lang/crates.io-index)" = "d5d788d3aa77bc0ef3e9621256885555368b47bd495c13dd2e7413c89f845520"
2017-08-07 10:06:02 +02:00
"checksum tiny-keccak 1.3.1 (registry+https://github.com/rust-lang/crates.io-index)" = "d52d12ad79e4063e0cb0ca5efa202ed7244b6ce4d25f4d3abe410b2a66128292"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum tokio-core 0.1.9 (registry+https://github.com/rust-lang/crates.io-index)" = "e85d419699ec4b71bfe35bbc25bb8771e52eff0471a7f75c853ad06e200b4f86"
"checksum tokio-io 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)" = "b4ab83e7adb5677e42e405fa4ceff75659d93c4d7d7dd22f52fcec59ee9f02af"
"checksum tokio-named-pipes 0.1.0 (git+https://github.com/nikvolf/tokio-named-pipes)" = "<none>"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum tokio-proto 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "8fbb47ae81353c63c487030659494b295f6cb6576242f907f203473b191b0389"
"checksum tokio-service 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "24da22d077e0f15f55162bdbdc661228c1581892f52074fb242678d015b45162"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum tokio-timer 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)" = "6131e780037787ff1b3f8aad9da83bca02438b72277850dd6ad0d455e0e20efc"
"checksum tokio-tls 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)" = "d88e411cac1c87e405e4090be004493c5d8072a370661033b1a64ea205ec2e13"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum tokio-uds 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)" = "6116c71be48f8f1656551fd16458247fdd6c03201d7893ad81189055fcde03e8"
"checksum toml 0.4.5 (registry+https://github.com/rust-lang/crates.io-index)" = "a7540f4ffc193e0d3c94121edb19b055670d369f77d5804db11ae053a45b6e7e"
"checksum traitobject 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "efd1f82c56340fdf16f2a953d7bda4f8fdffba13d93b00844c25572110b26079"
"checksum transient-hashmap 0.4.0 (registry+https://github.com/rust-lang/crates.io-index)" = "715254c8f0811be1a79ad3ea5e6fa3c8eddec2b03d7f5ba78cf093e56d79c24f"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum trezor-sys 1.0.0 (git+https://github.com/paritytech/trezor-sys)" = "<none>"
"checksum typeable 0.1.2 (registry+https://github.com/rust-lang/crates.io-index)" = "1410f6f91f21d1612654e7cc69193b0334f909dcf2c790c4826254fbb86f8887"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum unicase 1.4.2 (registry+https://github.com/rust-lang/crates.io-index)" = "7f4765f83163b74f957c797ad9253caf97f103fb064d3999aea9568d09fc8a33"
"checksum unicase 2.0.0 (registry+https://github.com/rust-lang/crates.io-index)" = "2e01da42520092d0cd2d6ac3ae69eb21a22ad43ff195676b86f8c37f487d6b80"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum unicode-bidi 0.3.4 (registry+https://github.com/rust-lang/crates.io-index)" = "49f2bd0c6468a8230e1db229cff8029217cf623c767ea5d60bfbd42729ea54d5"
"checksum unicode-normalization 0.1.5 (registry+https://github.com/rust-lang/crates.io-index)" = "51ccda9ef9efa3f7ef5d91e8f9b83bbe6955f9bf86aec89d5cce2c874625920f"
"checksum unicode-segmentation 1.2.0 (registry+https://github.com/rust-lang/crates.io-index)" = "a8083c594e02b8ae1654ae26f0ade5158b119bd88ad0e8227a5d8fcd72407946"
"checksum unicode-width 0.1.4 (registry+https://github.com/rust-lang/crates.io-index)" = "bf3a113775714a22dcb774d8ea3655c53a32debae63a063acc00a91cc586245f"
"checksum unicode-xid 0.0.4 (registry+https://github.com/rust-lang/crates.io-index)" = "8c1f860d7d29cf02cb2f3f359fd35991af3d30bac52c57d265a3c461074cb4dc"
"checksum unreachable 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "1f2ae5ddb18e1c92664717616dd9549dde73f539f01bd7b77c2edb2446bdff91"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum unreachable 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)" = "382810877fe448991dfc7f0dd6e3ae5d58088fd0ea5e35189655f84e6814fa56"
"checksum untrusted 0.5.1 (registry+https://github.com/rust-lang/crates.io-index)" = "f392d7819dbe58833e26872f5f6f0d68b7bbbe90fc3667e98731c4a15ad9a7ae"
"checksum url 1.5.1 (registry+https://github.com/rust-lang/crates.io-index)" = "eeb819346883532a271eb626deb43c4a1bb4c4dd47c519bd78137c3e72a4fe27"
"checksum utf8-ranges 1.0.0 (registry+https://github.com/rust-lang/crates.io-index)" = "662fab6525a98beff2921d7f61a39e7d59e0b425ebc7d0d9e66d316e55124122"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum vcpkg 0.2.2 (registry+https://github.com/rust-lang/crates.io-index)" = "9e0a7d8bed3178a8fb112199d466eeca9ed09a14ba8ad67718179b4fd5487d0b"
"checksum vec_map 0.8.0 (registry+https://github.com/rust-lang/crates.io-index)" = "887b5b631c2ad01628bbbaa7dd4c869f80d3186688f8d0b6f58774fbe324988c"
"checksum vecio 0.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "0795a11576d29ae80525a3fda315bf7b534f8feb9d34101e5fe63fb95bb2fd24"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum vergen 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "8c3365f36c57e5df714a34be40902b27a992eeddb9996eca52d0584611cf885d"
"checksum version_check 0.1.3 (registry+https://github.com/rust-lang/crates.io-index)" = "6b772017e347561807c1aa192438c5fd74242a670a6cffacc40f2defd1dc069d"
"checksum void 1.0.2 (registry+https://github.com/rust-lang/crates.io-index)" = "6a02e4885ed3bc0f2de90ea6dd45ebcbb66dacffe03547fadbb0eeae2770887d"
"checksum wasm-utils 0.1.0 (git+https://github.com/paritytech/wasm-utils)" = "<none>"
2016-12-13 23:38:29 +01:00
"checksum winapi 0.2.8 (registry+https://github.com/rust-lang/crates.io-index)" = "167dc9d6949a9b857f3451275e911c3f44255842c1f7a76f33c55103a909087a"
"checksum winapi-build 0.1.1 (registry+https://github.com/rust-lang/crates.io-index)" = "2d315eee3b34aca4797b2da6b13ed88266e6d612562a0c46390af8299fc699bc"
2017-07-06 11:36:15 +02:00
"checksum ws 0.7.1 (git+https://github.com/tomusdrw/ws-rs)" = "<none>"
"checksum ws2_32-sys 0.2.1 (registry+https://github.com/rust-lang/crates.io-index)" = "d59cefebd0c892fa2dd6de581e937301d8552cb44489cdff035c6187cb63fa5e"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum xdg 2.1.0 (registry+https://github.com/rust-lang/crates.io-index)" = "a66b7c2281ebde13cf4391d70d4c7e5946c3c25e72a7b859ca8f677dcd0b0c61"
"checksum xml-rs 0.3.6 (registry+https://github.com/rust-lang/crates.io-index)" = "7ec6c39eaa68382c8e31e35239402c0a9489d4141a8ceb0c716099a0b515b562"
"checksum xmltree 0.3.2 (registry+https://github.com/rust-lang/crates.io-index)" = "472a9d37c7c53ab2391161df5b89b1f3bf76dab6ab150d7941ecbdd832282082"
Trezor Support (#6403) * Copy modal from keepkey branch and generalize The keepkey PinMatrix modal needs to be the same for Trezor, but we should probably try to keep it general since it can be used for both. * Add trezor communication code This is a result of much trial-and-error and a couple of dead-ends in how to communicate and wire everything up. Code here is still a bit WIP with lots of debug prints and stuff. The test works though, it is possible to sign a transaction. * Extend the basic lib to allow Trezor This is kind of ugly and needs some cleanup and generalization. I’ve just copy-pasted some things to bring in the trezor wallets. I’ve also had to add a lock to the USB API so that only one thing talks to the USB at once. * Add RPC plumbing needed We need to be able to get “locked” devices from the frontend to figure out if we’re going to display the PinMatrix or not. Then we need to be able to send a pin to a device. * Add logic to query backend for Trezor and display PinMatrix There’s a bug somewhere here because signing a transaction fails if you take too long to press the confirm button on the device. * Change back to paritytech branch As my fork has been merged in. * Converting spaces to tabs, as it should be * Incorporate correct handling of EIP-155 Turns out the Trezor was adjusting the v part of the signature, and we’re already doing that so it was done twice. * Some circular logic here that was incorrect BE-encoded U256 is almost the same as RLP encoded without the size-byte, except for <u8 sized values. What’s really done is BE-encoded U256 and then left-trimmed to the smallest size. Kind of obvious in hindsight. * Resolve issue where not clicking fast enough fails The device will not repeat a ButtonRequest when you read from it, so you need to have a blocking `read` for whatever amount of time that you want to give the user to click. You could also have a shorter timeout but keep retrying for some amount of time, but it would amount to the same thing. * Scan after pin entry to make accepting it faster * Remove ability to cancel pin request * Some slight cleanup * Probe for the correct HID Version to determine padding * Move the PinMatrix from Accounts to Application * Removing unused dependencies * Mistake in copying over stuff from keepkey branch * Simplify FormattedMessage * Move generated code to external crate * Remove ethcore-util dependency * Fix broken import in test This test is useless without a connected Trezor, not sure how to make it useful without one. * Merge branch 'master' into fh-4500-trezor-support # Conflicts: # rpc/src/v1/helpers/dispatch.rs * Ignore test that can't be run without trezor device * Fixing grumbles * Avoiding owning data in RPC method * Checking for overflow in v part of signature * s/network_id/chain_id * Propagating an error from the HID Api * Condensing code a little bit * Fixing UI. * Debugging trezor. * Minor styling tweak * Make message type into an actual type This makes the message type that the RPC message accepts into an actual type as opposed to just a string, based on feedback. Although I’m not 100% sure this has actually improved the situation. Overall I think the hardware wallet interface needs some refactoring love. * Split the trezor RPC endpoint It’s split into two more generic endpoints that should be suitable for any hardware wallets with the same behavior to sit behind. * Reflect RPC method split in javascript * Fix bug with pin entry * Fix deadlock for Ledger * Avoid having a USB lock in just listing locked wallets * Fix javascript issue (see #6509) * Replace Mutex with RwLock * Update Ledger test * Fix typo causing faulty signatures (sometimes) * *Actually* fix tests * Update git submodule Needed to make tests pass * Swap line orders to prevent possible deadlock * Make setPinMatrixRequest an @action
2017-09-14 19:28:43 +02:00
"checksum zip 0.1.19 (registry+https://github.com/rust-lang/crates.io-index)" = "c0deac03fc7d43abcf19f2c2db6bd9289f9ea3d31f350e26eb0ed8b4117983c1"